Image Removed

Image Removed

...

1. Power adapter

1. Ethernet cable

1. User Manual

Anchor
_Phone_Installation _Phone_Installation

Anchor
_Toc346206960 _Toc346206960

Anchor
_Toc346281094 _Toc346281094

Anchor
_Toc347846623 _Toc347846623

Anchor
_Toc350702744 _Toc350702744

Anchor
_Toc509316760 _Toc509316760

Phone Installation

...

After your phone has been powered up, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization process by loading the saved configuration. The phone LCD screen will display "Booting".

And then show "Initializing" during the initialization.

The IP Phone will upgrade the firmware if there is a new firmware on your server. And the IP Phone will show "Check firmware, please waiting…" after initialization.

Then IP Phone will show Reboot information:

By default, the phone attempts to contact a DHCP server in your network in order to obtain its valid network settings, e.g. IP address, subnet mask, default gateway, DNS server.

...

You can view the system status of your phone via phone user interface or web user interface. The information of phone status includes: Information(e.g., Model, IP, MAC, Firmware, Hardware), Network(e.g., WAN Type, IP, Mask, LAN Type, Gateway, DNS… ), Account (e.g., register status of accounts).
To view the phone status via Phone interface:

1. Press Menu →Status →Information.

...

To view the phone status via Web interface:
1. Login Web interface (For How to login, please refer to Web Login).
2. View the information of Version, Account and Network.

Anchor
_Toc391560959 _Toc391560959

Anchor
_Toc509316766 _Toc509316766

Registration

To register via Phone interface:

1. Press Menu→ Settings→ Advanced setting (default password: admin)→ Accounts.

...

1. Press Save to save the configuration.

!worddav292303cd2f012cb49f9e667d89278f3a.png|height=64,width=192!
\\
*Note:*
If there is a port of sip server, you need to press "1" on the keypad, then you will find the ":".
*Additional Information:*
When the current input method is ABC/abc/2ab,
Pressing "1", you will find ", . ?:;".
Pressing "0", you will find " < >()\{\}\[\]".
Pressing "*", you will find "*/"!@$".
Pressing "#", you will find "#'%&*|".
\\
*To register via Web interface:*
\\

1. Login Web interface and Click Profile→ Basic.

...

1. Click to save the configuration.

Anchor
_Toc391560960 _Toc391560960

Anchor
_Toc509316767 _Toc509316767

Idle Screen

Anchor
_Toc347846631 _Toc347846631

Anchor
_Toc350702749 _Toc350702749

Anchor
_Toc509316768 _Toc509316768

Getting Familiar with Your Phone

Anchor
_Toc347846632 _Toc347846632

Anchor
_Toc350702750 _Toc350702750

Anchor
_Toc509316769 _Toc509316769

Hardware Components Preview

Anchor
_Icon_Preview _Icon_Preview

Anchor
_Toc346206957 _Toc346206957

Anchor
_Toc346281091 _Toc346281091

Anchor
_Toc347846633 _Toc347846633

Anchor
_Toc350702751 _Toc350702751

Anchor
_Toc509316770 _Toc509316770

Icon Preview

Anchor
_Toc391560964 _Toc391560964

Anchor
_Toc347846635 _Toc347846635

Anchor
_Toc350702753 _Toc350702753

Anchor
_Toc509316771 _Toc509316771

LED Instruction

This part mainly instructs the LED status. The Power LED Status describes on the premise that the LED settings all set as Yes. For LED status setting, please refer to: LED Status Setting

Anchor
_Toc391560965 _Toc391560965

Anchor
_Power_Indicator_LED _Power_Indicator_LED

Anchor
_Toc509316772 _Toc509316772

Power Indicator LED

Anchor
_Toc391560966 _Toc391560966

Anchor
_Toc509316773 _Toc509316773

Line LED:(Line Key set as Line)

Anchor
_Toc391560967 _Toc391560967

Anchor
_Toc509316774 _Toc509316774

BLF or BLF List Key LED Line/Line Key set as BLF)

Anchor
_Toc391560968 _Toc391560968

Anchor
_Toc509316775 _Toc509316775

Shared Line LED:

Anchor
_Toc391560969 _Toc391560969

Anchor
_Toc509316776 _Toc509316776

Other Key Led

Anchor
_Toc391560971 _Toc391560971

Anchor
_Info_Key_Instruction _Info_Key_Instruction

Anchor
_Toc509316777 _Toc509316777

User Interface

There are two ways to customize specific configurations on your IP phone:

• The user interface on the IP phone
• The user interface in a web browser on your PC

The hardware components keypad and LCD screen constitute the phone user interface, which allows the user to execute all call operation tasks and basic configuration changes directly on the phone. In addition, you can use the web user interface to access all configuration settings. In many instances, it is possible to use both the phone user interface and the web user interface to operate the phone and change settings. However, in some instances, it is only possible to use the phone or the web user interface.
Phone interface Overview

Anchor
_Memory_Key_Function_Overview_1 _Memory_Key_Function_Overview_1

Anchor
_Line_Key_Function _Line_Key_Function

Anchor
_Toc391560972 _Toc391560972

Anchor
_Toc509316778 _Toc509316778

Line Key Function Overview

Anchor
_Toc509316779 _Toc509316779

Basic Setting Configuration

...

1. Input the user name (default is admin), password (default is admin).
2. Login successfully.

Anchor
_Toc347846646 _Toc347846646

Anchor
_Toc350702764 _Toc350702764

Anchor
_Toc509316782 _Toc509316782

Administrator Password

...

To change password via Web interface

1. Management → Password.
2. Fill the value.
3. Click to save the configuration.

Anchor
_Toc2851 _Toc2851

Anchor
_Toc509316783 _Toc509316783

Language

The default Phone interface language is English.
To change the language via Phone interface

1. Press Menu → Settings → Basic Setting → Language.
2. Press or Save soft key to save the configuration.

To change the language via Web interface

1. Setting → Preference →Web Language & LCD Language.

...

1. Select the necessary one.
2. Press to save the configuration.

Anchor
_Toc22864 _Toc22864

Anchor
_Toc509316784 _Toc509316784

Screen Saver

There are two types of screen saver: Logo only, Time & Logo .
To enable screen saver via Phone interface

1. Press Menu → Settings → Basic Setting → Screensaver...
2. Press and or press Info/Switch soft key to Choose the Time-out as 1 min or 2/5/10/30 minute, then press the Save button.

...

To disable screen saver via Phone interface

1. Press Menu → Settings → Basic Setting → Screensaver...
2. Press and or press Info/Switch soft key to Choose the Time-out as off.
3. Press or Save soft key to save the selected configuration.

To Enable screen saver via Web interface

1. To Click Setting → Preference.

...

To Disable screen saver via Web interface

1. To Click Setting → Preference

...

To wake up screen saver via Web interface:

1. Click Setting → Preference

...

There are 20 levels. you can change the LCD's brightness according to your visual perception
To change the gray level via Phone interface

1. Press Menu → Settings → Basic Setting → Gray level
2. Press and or press Info/Switch soft key to Choose the level from 1 to 20
3. Press or Save soft key to save the selected configuration

...

To configure the Time & Date Format via Phone interface

1. Press Menu → Settings → Basic Setting → Time & Date Format
2. Press and or press Info/Switch key to change between 12 Hour or 24 Hour time display.
3. Press and or press Info/Switch key to change date display format among Y-M-D(year-month-day), M-D-Y(month-day-year), D-M-Y(day-month-year).
4. Press or Save soft key to save the configuration.

To configure the DHCP time via Phone interface

1. Press Menu → Settings → Basic Setting → DHCP time
2. Press and or press Info/Switch key to change between Disable and Enable.
3. Press or Save soft key to save the configuration.

...

Login name: admin, password: admin (default)

1. Setting → Date &Time →NTP Server

...

To change the Time Zone and Date Display Format via Web interface

1. Setting → Date &Time
2. Select the necessary one.
3. Press to save the configuration.

To change the SIP Date Override Time via Web interface

1. Setting → Date &Time→ SIP Date Override Time
2. Select Yes or No for SIP Date Override Time .
3. Click to save the configuration.

To change the Account via Web interface

1. Setting → Date &Time→ Account.

...

To change the Daylight Saving Time via Web interface

1. Setting → Date &Time→ Daylight Saving Time

...

1. Select Disable or Enable or Auto for Daylight Saving Time.
2. Click to save the configuration.

...

The LED Status setting mainly defines the power indicator LED.
To configure LED Status via Web interface:

1. Click Setting→ Preference

...

For the LED status description, see: LED Instruction[ Power Indicator LED|#_Power_Indicator_LED]

Anchor
_Toc27651 _Toc27651

Anchor
_Toc509316788 _Toc509316788

Key as Send

To configure Key as Send via Phone interface

1. Press Menu →Features → Key as Send

...

To cancel # Key as Send via Phone interface

1. Press Menu →Features → Key as Send

...

To configure IPv4 via Web interface:

1. Click Network→ Basic→ Internet Port

...

To configure DHCP via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port→ IPv4→ DHCP mode.

...

To configure a static IP address via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IPv4 → Static mode.

...

1. Enter the parameters: IP, Netmask, Gateway, Pri.DNS(primary DNS), Sec.DNS (secondary DNS) in the corresponding fields.

1. Click Save and restart the phone.

1. Press the Save soft key to accept the change or the Cancel soft key to cancel. If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain the IP address. Contact your system administrator for the PPPoE user name and password.

To configure PPPoE via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → PPPoE mode.

...

To configure Network via Web interface:

1. Click Network→ Basic→ IPv4 setting

...

1. Click the SaveSet and restart the phone.

Anchor
_IPv6 _IPv6

Anchor
_Toc475178328 _Toc475178328

Anchor
_Toc509316791 _Toc509316791

IPv6

...

To configure IPv6 via Web interface:

1. Click Network→ Basic→ Internet Port

...

To configure DHCP via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port→ IPv6→ DHCP mode.

...

To configure a static IP address via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IPv6 → Static mode.

...

1. Enter the parameters: IP, IPV6 Prefix, Gateway, Pri.DNS(primary DNS), Sec.DNS (secondary DNS) in the corresponding fields.

1. Click Save and restart the phone.

To configure Network via Web interface:

1. Click Network→ Basic→ IPv6 setting

...

If you set IP Mode to IPv4&IPv6,IP phone will support both IPv4 and IPv6 address. The settings of DHCP, Static, and PPPoE are same as above.
To configure IPv4&IPv6 via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IP Port Mode.
2. Press or to change the IP Port Mode..
3. Press or Save soft key to save the configuration.

To configure IPv4&IPv6 via Web interface:

1. Click Network→ Basic→ Internet Port

...

1. Select IPv4&IPv6 for Internet Port

1. Click for the setting.

Anchor
_Toc509316793 _Toc509316793

PC Port

Two modes for PC port: bridge and router.
To configure PC Bridge via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ PC Port → Bridge mode.

...

To configure PC router via Phone interface:

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ PC Port → Router mode.

...

To configure Bridge via Web interface:

1. Click Network→ PC Port

1. Select As Bridge.

...

To configure Router via Web interface:

1. Click Network→ PC Port

1. Select As Router

...

1. Click and the phone will reboot automatically

Anchor
_Time_and_Date _Time_and_Date

Anchor
_Toc347846640 _Toc347846640

Anchor
_Toc350702758 _Toc350702758

Anchor
_Toc391560982 _Toc391560982

Anchor
_Toc509316794 _Toc509316794

Contact Settings

...

1. Press Menu → DIR→ Contacts...

1. Press Add soft key

.

1. Enter the necessary information as Name, Phone number…
2. Press Save soft key or to add the contacts successfully.

To add contacts from History via Phone interface

1. Press History soft key or press Menu →History→ Local History
2. Press and to select the targeted one. (Press and switched among the All calls, Dialed calls, Received calls, Missed Calls and Forward Calls).

...

To add contacts via Web interface

1. Click Directory→ Directory

...

To add blacklist from history via Phone interface

1. Press History soft key or press Menu → History → Local History
2. Press and to select the targeted one.
3. Press Option soft key → Add to Blacklist
4. Edit the necessary information as Name, Phone number…
5. Press Save soft key or to add successfully.

To import or export the contact list
You can manage your phone's local directory via phone or Web interface. But you can only import or export the contact list via Web interface.
To import an XML file of contact list via Web interface:

1. Click on Directory → Directory
2. Click Choose file to select a contact list file (file format must be .xml) from your local system.
3. Click Import XML to import the contact list.

To export an XML file of contact list via Web interface:

1. Click on Directory → Directory
2. Click Export XML to export the contact list.

To import a CSV file of contact list via Web interface:

1. Click on Directory → Directory
2. Click Choose file to select a contact list file (file format must be .csv) from your local system.
3. Click Import Csv to import the contact list.

To export a CSV file of contact list via Web interface:

1. Click on Directory → Directory
2. Click Export Csv to export the contact list.

...

To set Remote Phonebook via Web interface:

1. Login the Web interface and click Directory→ Remote Phone Book

...

Following is the example screenshot for the configuration.


To Configure LDAP Key
To configure LDAP Key via Web interface:

1. Click Function Keys→ Line Key→ choose Line Key 2(for example)

...

To Configure LDAP Key via Phone interface:

1. Press Menu→ Features→ Function Keys→ Line Keys as Function Keys→ Line Key 2

...

When press the LDAP Key the LCD will display as following:

For More detail, please refer to LDAP Notes on www.htek.com

Anchor
_Toc427937048 _Toc427937048

Anchor
_Toc509316798 _Toc509316798

Search Contact

...

This phone maintains call history lists of Dialed Calls, Received Calls, Missed Calls and Forwarded Calls. The call history list supports up to100 entries in all on Phone interface and more than 1500 items. You can check the call history, dial a call, add a contact or delete an entry from the call history list. You should enable the history record feature in advance.
To enable the history record feature via Phone interface:

1. Press Menu→ Features→ History Setting
2. Press and or Switch soft key to enable History record.
3. Press Save soft key to save the configuration.

To check the call history via Phone interface:

1. Press the History soft key. The LCD screen displays All Calls list.

...

To delete an entry from the call history list via Phone interface:

1. Press the History soft key.

...

To delete all entries from the call history list via Phone interface:

1. Press the History soft key.

...

To check the call history via Web interface:
1. Click Directory→ Call History
2. Click Dialed List, Missed List, Received List, Forwarded List then you can see the history list.

To dial a call from Call History via Web interface:

1. Click Directory→ Call History

...

You can adjust the type and volume of the ring tone.
To adjust the Ring Tone Type via Phone interface

1. Press Menu → Settings → Basic Setting → Ring Tone.
2. Press and to select the aimed one.
3. Press or Save soft key to save the configuration.

To adjust the Ring Tone Type via Web interface

1. Setting → Preference →Ring Tones

...

To configure Distinctive Ring Tone via Phone interface

1. Press Directory

1. Select the target contact

...

To configure Distinctive Ring Tone via Web interface

1. Directory → Directory → Contact

...

This option can set whether to play the beep for phone's voice mail

1. Click the Setting → Preference

...

When you hold the phone. How many seconds to play beep?

1. Click the Setting à Preference

...

Dial plan is a string of characters that governs the way this phone processes the inputs received from your phone keypad. This phone supports dial plan with following accept digits:
1,2,3,4,5,6,7,8,9,0,*,#

To configure dial plan via Web interface:

1. Click Account →Basic →Dial Plan.
2. Fill the value in dial plan field.
3. Click to save the configuration.

Anchor
_Toc29655 _Toc29655

Anchor
_Toc427937076 _Toc427937076

Anchor
_Toc509316809 _Toc509316809

Dial-Now Timeout

Dial-Now Timeout means that when you enter the number which is matching with dial plan, it will dial out automatically after some time when you stop entering the number.
To configure Dial-Now Timeout via Web interface:

1. Click Web interface Setting → Preference

...

No Key Entry Timeout means that when you enter the number, it will dial out automatically after some time when you stop enter the number.
To configure No Key Entry Timeout via Web interface

1. Click Web interface Setting → Preference

...

1. Click the button to save the configuration.

Anchor
_Toc391560998 _Toc391560998

Anchor
_Toc509316811 _Toc509316811

Emergency Call

...

When setting function keys, you need to set the label of the function keys. If the words are too long to show on the label, you can use this function to make labels scroll. Another approach is to set the labels to long label mode.
To configure Label Scroll via Web interface:

1. Click the Setting → Preference

...

Whether to show missed call notification on LCD
To configure Show Missed Calls via Web interface:

1. Click the Setting → Preference

...

This function is to allow reboot during the calls or not

1. Click the Setting à Preference

...

Call redial has two ways:(1) To redial the last placed call from the IP Phone (2) To redial the call from all calls list

1. Click the Setting à Preference

...

To enable Keypad Lock via Phone interface
1. Press Menu→Settings→Advanced Setting→Phone Setting→Lock
2. Press and key or Info or Switch to change choose lock type: All Keys, Menu Key, Function Key, Lock & Answer
3. Press Save or OK key to save the configuration.
To disable Keypad Lock via Phone interface

1. Press Menu→Settings→Advanced Setting(Password: admin)→Phone Setting→Lock

...

1. Select On or Off for Suppress DTMF Display Delay.

1. Click for the setting.

Anchor
_Check-Syn_With_Authenticate _Check-Syn_With_Authenticate

Anchor
_Toc475432632 _Toc475432632

Anchor
_Toc509316821 _Toc509316821

Check-Syn With Authenticate

...

To configure action url via Web interface:

1. Click Setting→ Action URL

...

This feature mainly defines which shown on the soft key in some status. For example, what the soft key displays when dialing, or talking.
To configure Soft key via Web interface:

1. Click Setting→ Softkey Layout

...

moves the Disable key to Enable field. moves the Enable key, and it will back to Disable field.

1. Click or to change to position or each feature.

...

1. Click to save the configuration.

Anchor
_Programmable_Key _Programmable_Key

Anchor
_Toc391561002 _Toc391561002

Anchor
_Toc509316825 _Toc509316825

Programmable Key

For the default keys as Soft keys, Navigation keys and so on, you can define them as some specific feature, and it works only on the idle page.
To configure Programmable Key via Web interface:

1. Click Function Keys→ Programmable Key

...

1. Select the desired Key to set.
2. Click to save the setting.
3. By clicking , all setting of the keys will be back to default.

Anchor
_Toc5622 _Toc5622

Anchor
_Toc509316826 _Toc509316826

Basic Call Features

...

There are three ways to dialing a call: Handset, Headset and Hands-free speakerphone.
To place a call by Handset
1. Pick up the handset, or press a line key and dial the necessary number.
2. Press or or press the Send soft key, then the call is sending.
To place a call by Headset:
1. Press the ( light is Green)
2. Enter the desired number.
3. Press or or press the Send soft key, then the call is sending.
Using headset to place and answer calls for all time

1. Click Web interface Setting → Preference

...

Placing a call by hands-free speakerphone
1. Press the , or press the Line key, then you can hear the dial tone.
2. Press the number.
3. Press or or press the Send soft key, then the call is sending.
To place a call by call history or Directory via Phone interface
1. Press the History / DIR soft key (On the idle page) or Menu → History /Directory
2. Press and to select the targeted one.
3. Press the Send soft key, or , or , or the corresponding line key, then the call is sending.

1. Press a line key and dial phone number, then make a call.

...

Here shows to end a call during three modes:
To end a call by Handset
Press the End Call soft key or hang up the handset, or press
To end a call under Headset Mode
Press the End Call soft key or press , or press .
To end a call under hands-free speakerphone Mode
Press the End Call soft key or press , or press .

Anchor
_Toc476226764 _Toc476226764

Anchor
_Toc347846650 _Toc347846650

Anchor
_Toc350702768 _Toc350702768

Anchor
_Toc509316829 _Toc509316829

Redial a Call

To redial the last placed call from the IP Phone:
Press directly when LCD is on the idle interface.

Anchor
_Toc347846651 _Toc347846651

Anchor
_Toc350702769 _Toc350702769

Anchor
_Toc2184 _Toc2184

Anchor
_Toc509316830 _Toc509316830

Receive a Call

There are three ways to receive a call when the phone is ringing:
To receive a call by handset
Pick up the handset and now the conversation is built.
To receive a call by headset
Press and now the conversation is built.
To receive a call by hands-free speaker
1. Option 1: Press directly.
2. Option 2: Press Answer soft key.
3. Option 3: Press the Line key (flashes red).
Moreover, some other action can be done by soft key when the call is coming.

1. Press the Reject soft key to reject the call. Or press to reject the current call.

...

There are two incoming call show modes for this phone:

1. name and number of the contacts

...

To set incoming call show mode via Web interface:

1. Click Setting→ Preference

...

1. Click to save the setting.

Anchor
_Toc509316832 _Toc509316832

Auto Answer

...

To Disable Auto Answer via Web interface

1. To Click Profile → Advanced

...

When use hold feature, the Hold icon will show on the display.
To make a call on hold during three modes:
To hold a call under handset mode:
1. Press Hold soft key to hold the current call.

2. Press Resume soft key to resume the call on hold.

To hold a call under headset mode:

1. Press Hold soft key to hold the current call.

...

To hold a call during the speaker mode:

1. Press Hold soft key to hold the current call.

...

This phone supports blind, attended and Semi-Attended Transfer.

1. Press Transfer soft key during the conversation, the call is on hold now.

...

1. Setting → Features → Transfer Setting: Hold Transfer On Hook: ON.

...

Transfer to New Call via Web interface
1. Click Setting → Features
2. Select Transfer Mode via DSS key: New Call
3. Select the desired Line Key and select Transfer in the Type.
4. Enter the phone number in the Value field.

...

The phone will not release the call until receiving BYE from the server.

Anchor
_Toc16935 _Toc16935

Anchor
_Toc509316835 _Toc509316835

Call Conference

...

1. A end the call, the conference is finished.

...

This phone supports static forward (always forward, busy forward and no answer forward) and dynamic forward
To configure static forward
To configure always forward
With this feature, all incoming calls will forward immediately to configured number.

1. Press Menu → Features → Call Forward →Always Forward.

...

To configure busy forward
With this feature, the incoming calls are immediately forwarded if the phone is busy.

1. Press Menu →Features → Call Forward →Busy Forward.

...

To configure no answer forward
No Answer Forward: Incoming calls are forwarded if not answered after some time.

1. Press Menu →Features → Call Forward →No Answer Forward.

...

When the Forward feature is enabled, the Forward Icon will display on Top of the LCD.

To configure Forward via Web interface

1. Setting → Features

1. Click On for the Always/Busy/No Answer

...

To cancel the forward feature via Phone interface

1. Press Menu →Features → Call Forward →Always/Busy/No Answer Forward
2. Press and or press Info/Switch soft key to select the disable choice
3. Press or Save soft key to save the configuration.

To cancel the forward feature via Web interface

1. Setting → Features

1. Click Off for the Always/Busy/No Answer

...

To configure dynamic forward
Forward an incoming call during the ringing.

1. When the phone is ringing, press FWD soft key.

...

1. Press or press the Send soft key, then the call is forwarded.

Anchor
_Toc654 _Toc654

Anchor
_Toc350702763 _Toc350702763

Anchor
_Toc347846645 _Toc347846645

Anchor
_Toc509316837 _Toc509316837

Call Return

...

To configure the Call Return via Web interface

1. Click Function keys → Line Key.

...

When this option is set, if the phone you call is busy and does not set call waiting or voice mail, your LCD screen will prompt for call-back, as shown in figure

If you press the callback, the phone will dial the Callback phone number.
To configure the Call Back via Web interface

1. Click Setting →Features →Callback .

...

1. Fill the Callback phone number.
2. Click to save the configuration.

Anchor
_Toc398041776 _Toc398041776

Anchor
_Toc398135332 _Toc398135332

Anchor
_Toc398299780 _Toc398299780

Anchor
_Toc509316839 _Toc509316839

Call Waiting Tone

...

To Change the Call Waiting Tone time via Web interface
1. Click Setting → Tones

2. Change the Tone Time as you want (for example 3s)

Anchor
_Toc391561016 _Toc391561016

Anchor
_Toc25216 _Toc25216

Anchor
_Toc509316840 _Toc509316840

Hide Caller ID

Just enable the unknown/hidden caller feature, by enabling Anonymous call feature thereby the receiver won't be able to know who is calling them.
To configure anonymous call

1. Press Menu →Features →Anonymous Call →Account ID 1

...

If you do not want to be disturb by anonymous calls, you can set the reject anonymous call features, so you will not hear the unknown calls
To configure rejecting anonymous call

1. Press Menu →Features →Anonymous Call →Account ID 1

...

To cancel rejecting anonymous call

1. Press Menu →Features →Anonymous Call →Account ID 1

...

When you use the DND feature, the phone is to reject all incoming calls automatically and you can see the DND icon shown on the Top of the LCD on idle page.
To enable DND feature via Phone interface
Press the DND soft key when the phone is idle, and then DND icon shown on the LCD.
To disable DND feature via Phone interface
Press the DND soft key again, and then there is no DND icon on the LCD.

Anchor
_Toc5142 _Toc5142

Anchor
_Toc509316844 _Toc509316844

Hot Line

To configure Hot Line

1. Press Menu →Features → Hot Line

...

To configure Hotline auto dial via Web interface

1. Setting → Features.
2. Fill the number in the Hotline Number and Hotline Time-out.
3. Click to save the configuration.

...

When this option is set, if the phone you call is busy and does not set call waiting or voice mail, your LCD screen will prompt for Auto Redial, as shown in figure.

If you press OK, your LCD will prompt Auto Redial Interval and Auto Redial Times
To configure Auto Redial via Web interface

1. Click Setting →Features → Auto Redial

...

It works same as Line keys.
To configure Line Feature via Web interface

1. Click Function keys → Line Key.

...

1. Click the button to save the configuration.

Anchor
_Speed_Dial _Speed_Dial

Anchor
_Toc391561026 _Toc391561026

Anchor
_Toc509316848 _Toc509316848

Speed Dial

With this feature, you can dial one number by pressing the configured speed dial key.
To configure Speed Dial feature via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

Then the selected Line Key will work as Speed Dial.
To configure Speed Dial feature via Web interface

1. Click Function keys → Line Key.

...

1. Click the to save the configuration.

Anchor
_BLF_1 _BLF_1

Anchor
_Voice_Message _Voice_Message

Anchor
_BLF_List _BLF_List

Anchor
_Toc391561028 _Toc391561028

Anchor
_Toc509316849 _Toc509316849

BLF

...

To configure a BLF key by phone

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example).

...

To configure a BLF key by web

1. Click Function keys → Line Key.

...

1. Click to save the configuration.

Anchor
_BLF_List_1 _BLF_List_1

Anchor
_Toc509316850 _Toc509316850

BLF List

To configure BLF List via Web interface:

1. Login and click Account→Basic
2. Fill the Eventlist BLF URL and click to save the configuration.

1. To configure BLF List Keys

...

To configure the Voice mail feature via Phone interface

1. Press Menu →Messages →Voice Mail →Set Voice Mail.

...

To configure Voice Mail Line Key via Web interface:

1. Click Function keys → Line Key.

...

To configure a Voice mail key by Phone interface:

1. Press Menu →Features →Function Keys →Line Keys as Function Keys→ Line Key2(for example).

...

To view the voicemail via Phone interface
Press Menu→Messages→Voice Mail→View Voice Mail.
The LCD screen displays the amount of new and old voice mails

Anchor
_Toc18288 _Toc18288

Anchor
_Toc509316852 _Toc509316852

Direct Pickup

With this feature, you can pick up the set line when it ringing.
To configure Direct Pickup feature via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

Then the selected Line Key will work as Direct Pickup.
To configure Direct Pickup feature via Web interface

1. Click Function keys → Line Key.

...

With this feature, you can pick up the specified group that you want incoming calls.
To configure the Group Pickup via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the Group Pick up via Web interface

1. Click Function keys → Line Key.

...

With this feature, you can put a call on hold and continue the conversation from another phone.
To configure the Call Park via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the Call Park via Web interface

1. Click Function keys → Line Key.

...

For More information for Call Park, please see: Call park note on www.htek.com

Anchor
_Toc347846665 _Toc347846665

Anchor
_Toc350702783 _Toc350702783

Anchor
_Toc6719 _Toc6719

Anchor
_Toc509316855 _Toc509316855

Intercom

When use the intercom feature, you can quickly get access connect to the configured one.
To configure intercom feature via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

Then the selected Line Key will work as intercom.
To configure Intercom feature via Web interface

1. Click Function keys → Line Key.

...

1. Set On or Off for Intercom Barge.

1. Click for the setting.

Anchor
_BLF _BLF

Anchor
_Toc391561034 _Toc391561034

Anchor
_Toc509316857 _Toc509316857

DTMF

When the key is configured as DTMF key, you are allowed to send out the desired DTMF number during the conversation.
To use this feature, you should sure that the DTMF Tone is on.
To configure the DTMF via Web interface

1. Click Setting→ Preference

...

To configure the DTMF via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the DTMF via Web interface

1. Click Function keys → Line Key.

...

If the key is configured as Prefix key, you can set the number prefix (e.g. Before the number plus 9), then you don't input 9, press the key and 9 will display on the LCD interface.
To configure the Prefix via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the Prefix via Web interface

1. Click Function keys → Line Key.

...

When use the Local Group feature, press the key and enter the local Contacts interface quickly.
To configure the Local Group via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the Local Group via Web interface

1. Click Function keys → Line Key.

...

Then you can press the Local Group key to access the pre-defined contact group in the local directory quickly.

Anchor
_XML_Group _XML_Group

Anchor
_Toc390776802 _Toc390776802

Anchor
_Toc391561037 _Toc391561037

Anchor
_Toc509316860 _Toc509316860

XML Group

When use the XML Group feature, press the key and enter the Remote Contacts interface quickly.
To configure the XML Group via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)
2. Press and key to select the XML Group in the Type field.
3. Press and key to select the Account ID.
4. Press or Save soft key to save the configuration

To configure the XML Group via Web interface

1. Click Function keys → Line Key.

...

1. Click the button to save the configuration.

Anchor
_LDAP _LDAP

Anchor
_Toc390776803 _Toc390776803

Anchor
_Toc391561038 _Toc391561038

Anchor
_Toc509316861 _Toc509316861

LDAP

When use the LDAP feature, you can get the LDAP Phonebook directly.
To configure the LDAP via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the LDAP via Web interface

1. Click Function keys → Line Key.

...

You can use this key feature to access the Xml browser quickly. The Xml browser allows you to create custom services which meet your functional requirements on the server. You can customize practical applications, such as weather report, stock information, Google search, etc.
To configure the XML Browser via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the XML Browser via Web interface

1. Click Function keys → Line Key.

...

1. Click button to save the configuration.

Anchor
_Broadsoft_Group _Broadsoft_Group

Anchor
_Toc390776805 _Toc390776805

Anchor
_Toc391561040 _Toc391561040

Anchor
_Toc509316863 _Toc509316863

Broadsoft Group

When using the BroadSoft Group feature, by just pressing the key you can enter the Broadsoft Contacts interface quickly.
To configure the Broadsoft Group via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the Broadsoft Group via Web interface

1. Click Function keys → Line Key.

...

The Htek IP Phone supports up to 5-way conference. You are allowed to configure the programmable key to be used as a conference key. This key works same as .
To configure the Conference via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure Conference via Web interface

1. Click Function keys →Line Key.

...

If the key is configured as Forward key, press this key under the idle status, the IP phone will turn to the Always Forward interface and you can set the Forward to number, then when there is any call to the number will be forwarded to the set number automatically.
To configure the Forward via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure Forward via Web interface

1. Click Function keys →Line Key.

...

You are able to configure the key as a transfer key to perform the Blind/Attended/ Semi-Attended Transfer.

To configure the Transfer via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure Transfer via Web interface

1. Click Function keys →Line Key.

...

The key can be configured as a hold key. You can use this key to hold and resume a call during the conversation.
To configure the Hold via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure Hold via Web interface

1. Click Function keys →Line Key.

...

With this feature, when you have an active call, you can listen using Handset and Free-speaker, but only can use the handset to speak.
To configure the Group listening via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure Group listening via Web interface

1. Click Function keys →Line Key.

...

If the key is configured as DND key, allows you to activate the DND function immediately when you press it and the phone will reject all incoming calls automatically. Press it again to deactivate DND mode.
To configure the DND via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure DND via Web interface

1. Click Function keys →Line Key.

...

If the key is configured as Redial key, you can redial the last placed call from the IP Phone.
To configure Redial via Web interface

1. Click Function keys →Line Key

...

To send SMS via web Interface

1. Click Setting→ SMS

1. Select the Account(from which account the SMS sent)

...

To send SMS via Phone interface:

1. Click Menu→ Messages→ Text Message→ Set SMS

...

To configure the SMS via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure SMS via Web interface

1. Click Function keys →Line Key.

...

To configure the record via Web interface

1. Click Function keys → Line Key.

...

1. Click the button to save the configuration.

Anchor
_Toc509316875 _Toc509316875

URL Record

The phone sends HTTP URL request to trigger a recording. Contact your system administrator for the predefined URL.
To configure the URL record via Phone interface

1. Press Menu →Features →Function Keys→ Line Keys as Function Keys → Line Key2(for example)
2. Press and key to select the URL Record in the Type field.
3. Press or Save soft key to save the configuration

To configure the record via Web interface

1. Click Function keys → Line Key.

...

With this feature, you can call a paging group directly.
To configure the paging via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the Paging via Web interface

1. Click Function keys → Line Key.

...

Htek IP Phone supports "Share Call Appearance" by Broadsoft and XCast standard. This feature allows members of the SCA group to shared SIP lines and provides status monitoring (idle, active, progressing, hold) of the shared line. When there is an incoming call designated for the SCA group, all of the members of the group will be notified of an incoming call and will be able to answer the call from the phone with the SCA extension registered in the group.
All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the line and places an outgoing call, and all the users of this group will not be able to seize the line until the line goes back to an idle state or when the call is placed on hold (with the exception of when multiple call appearances are enabled on the server side).
In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a member of the group places the call on public hold, the other users of the SCA group will be notified of this by the red-flashing button and they will be able to resume the call from their phone by pressing the line button. However, if this call is placed on private-hold, no other member of the SCA group will be able to resume that call.
To enable share call appearance, the user would need to register the share line account on the phone. In addition, they would need to navigate to "Account" → "Advanced" on the webpage and set the line to "Share Line" and "SIP Server Type", and configure the line key or Line Key as "line" type with the desired account on webpage or LCD. If the user requires more share call appearances, the user can configure multiple line keys (Function keys→Line key) to be "line" type associated with the account.
This feature is very useful in the boss and secretary scenario. For example, the secretary can share the boss' extension number on her phone. When there is an incoming call to the extension number of the boss, both the phones of the boss and the secretary will ring simultaneously. Either the boss or the secretary can answer the call. Calls on share line can be placed on hold or barged in.
To configure the line key as line via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)

...

To configure the line key as line via Web interface

1. Click Function keys → Line Key.

...

1. Click the button to save the configuration and then restart.

Anchor
_Public_Hold _Public_Hold

Anchor
_Toc388887860 _Toc388887860

Anchor
_Toc388952885 _Toc388952885

Anchor
_Toc391561055 _Toc391561055

Anchor
_Toc509316878 _Toc509316878

Public Hold

The key can be configured as a public hold key. During a conversation, all members belonging to that particular SLA group can use this key to hold or resume a call.
To configure the Public hold via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)
2. Press and key to select the Public Hold in the Type field.
3. Press or Save soft key to save the configuration

To configure public hold via Web interface

1. Click Function keys →Line Key.

...

The key can be configured as a private hold key. During a conversation, all members belonging to that particular SLA group can use this key to hold the call, but only the initiator can resume the call.
To configure the Private hold via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)
2. Press and key to select the Private Hold in the Type field.
3. Press or Save soft key to save the configuration

To configure private hold via Web interface

1. Click Function keys →Line Key.

...

Hot Desking originates from the definition of being the temporary physical occupant of a work station or surface by a particular employee. A primary motivation for Hot Desking is cost reduction. This feature is regularly used in places where all employees are not in the office at the same time, or not in the office for a very long time, which means their personal offices are often vacant, consuming valuable space and resources.
You can use Hot Desking on the IP phone to logout the existing accounts and then log in a new account, which allows many users to share the phone resource in different times. To use this feature, first you need to configure a Hot Desking key in the advance settings.
This feature is supported on the version 1.0.3.82 or later
To configure the hot desking via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)
2. Press and or press key to select the Hot Desking in the Type field.

...

To configure the hot desking via Web interface:

1. Click Function keys →Line Key.

...

To use the Hot desking feature on the user interface:

1. Press the Hot Desking key when the IP Phone is idle.

...

You can see the account information which has changed.

Anchor
_Toc509316881 _Toc509316881

ACD

ACD feature is often used in offices for customer service, such as call center. The ACD system handles large volumes of incoming calls from callers who have no need to talk to a specific person but who require assistance from any of the different personnel at the earliest point. The ACD feature on the Htek IP Phone allows the ACD system to distribute calls from large volumes of incoming calls to the registered IP phone users. To use this feature, first you should configure an ACD key in the advance settings.
To configure the ACD via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)
2. Press and or press key to select the ACD in the Type field.

...

To configure the ACD via Web interface:

1. Click Function keys →Line Key.

...

1. Click the button to save the configuration.

Anchor
_Toc509316882 _Toc509316882

Zero Touch

You can use this key feature to configure auto provision and network parameters quickly.
This feature is supported on the version 1.0.3.82 or later
To configure the zero touch via Phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2(for example)
2. Press and or press key to select the Zero Touch in the Type field.
3. Press or Save soft key to save the configuration

To configure the zero touch via Web interface:

1. Click Function keys →Line Key.

...

To use the zero touch feature on the user interface:

1. Press the Zero Touch key when the IP Phone is idle.

...

1. When you finish the setting, you can press the OK to accept the changes.

Anchor
_Toc427937116 _Toc427937116

Anchor
_Toc509316883 _Toc509316883

Multicast Paging

You can use multicast paging to quickly and easily forward out time sensitive announcements to people within the multicast group. You can configure a multicast paging key or a paging list key on the phone, which allows you to send a Real Time Transport Protocol (RTP) stream to the pre-configured multicast address(es) without involving SIP signaling. You can configure the phone to receive an RTP stream from pre-configured multicast listening address(es) without involving SIP signaling. You can specify up to 10 multicast listening addresses.

Anchor
_Toc427937117 _Toc427937117

Anchor
_Toc509316884 _Toc509316884

Sending RTP Stream

To configure a multicast paging key via Phone interface

1. Press Menu →Features →line or Line Key →Line Key2(e.g.)

...

To configure a multicast paging key via Web interface

1. Function keys→Line key:
2. Select the desired Key and select Multicast Paging in the Type.
3. Enter the multicast IP address and port number (e.g., 224.5.6.20:2000) in the Value field.

...

1. 1. 1. 1. 1. 1. 1. Click Directory→Multicast Paging
                  2. Select the desired value from the pull-down list of Paging Barge.
                  3. Select the desired value from the pull-down list of Paging Priority Active.
                  4. Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:2000) which the phone listens to for incoming RTP multicast in the Listening Address field.
                  5. Enter the label in the Label field.
                  6. Click button to save the configuration.

Anchor
_Toc350702790 _Toc350702790

Anchor
_Toc5318 _Toc5318

Anchor
_Toc509316886 _Toc509316886

Upgrade

...

To set Factory Reset by Phone interface

1. Press Menu → Settings → Advanced Setting( default password: admin) → Phone Setting → Factory Reset

...

To Reset to Factory via Web interface

1. Click Management → Upgrade
2. Click and then confirm the setting.

...

To use pcap via Web interface:

1. Click Management→ Tools

1. Click Start and then operation the phone

...

1. Then you'll get the Pacp captures.

Anchor
_Toc391561060 _Toc391561060

Anchor
_Toc509316889 _Toc509316889

System Log

To download system log via Web interface:

1. Click Management→ Configuration

...

1. Then you'll get a txt file: syslog.tgz.

Anchor
_Toc509316890 _Toc509316890

Upgrade

...

To upgrade manually via the Web configuration interface

1. Click Management → Upgrade

...

*To Restore a configuration file:*

1. Click Management → Configuration →Configure File

...