Page Comparison

...

The package contains the following parts, please check if all the items are not missed:

1. The phone device
   Image Modified
2. The footstand
   Image Modified
3. Handset
   Image Modified
4. Headset cord
   Image Modified
5. Power adapter
   Image Modified
6. Ethernet cable
   Image Modified
7. Quick installation reference
   Image Modified

Phone Installation

1. Attach the Foot stand

...

1. Press Menu →Status →Information
   Image Modified
2. Press Menu →Status →Network
   Image Modified
3. Press Menu →Status →Account
   Image Modified

To view the phone status via Web interface:
Login webpage (For How to login, please refer to Web Login)
View the information of Version, Account and Network.

...

To register via phone interface: 

1. Press Menu→Setting→Advanced setting (default password: admin)→Accounts 
2. Select the desired account 
3. Select Enable for Account active 
4. Filled the SIP Server 
5. Filled the Failover SIP server if need (Optional) 
6. Filled the Outbound Proxy (Optional) 
7. Filled the SIP User ID, Authenticate ID 
8. Filled the password, Name (shown on LCD) and Ringtone. 
9. Press Save to save the configuration. 
   Image Modified
   

...

Note:
If there is a port of sip server, you need to press "1" on the keypad, then you will find the ":".
Additional Information:
When the current input method is ABC/abc/2ab,
Pressing "1", you will find ", . ?:;"
Pressing "0", you will find " < >(){}[]"

...

Pressing “*”, you will find

...

“*/

...

”!

...

@$”
Pressing "#", you will find "#'%&*|" 
To register via web interface: 

1. Login webpage and Click Account→Basic
2. Select the desired Account
3. Select Yes for Account Active
4. Filled the Primary SIP SERVER and other account information
5. Click to save the configuration.
   Image Modified

...

Icon Preview

Image RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage Removed

Icon	Description Image Removed
Image Added	Network down
Image Added	Registered succeed
Image Added	Unregistered
Image Added	Speakerphone mode
Image Added	Handset mode
Image Added	Headset mode
Image Added	Voice messages
Image Added	Text message
Image Added	Mute
Image Modified	Do Not Disturb
Image Added	Volume is 0
Image Modified	Hold
Image Modified	Received calls
Image Modified	Dialed Calls
Image Modified	Missed calls
Image Modified	Forward calls
Image Modified	Conference
Image Added	Keypad locked
Image Added	Keypad unlocked

LED Instruction

This part mainly instructs the LED status. The Power LED Status describe on the premise that the LED setting all set as Yes. For LED status setting, please refer to: LED Status Setting

...

1. Quick get the Information page.
   Image Modified
2. Get the full information of the item with . When the item with , it means the information is not full display or there more options for the item. Press info key, you can get the complete content or the prompt list for all options.
   Image Modified
3. Fast access to the new missed or Forward calls, New Voicemail or Text Message.
   Image Modified
4. Get all other parties information during a conference.
   Image Modified

User Interface

There are two ways to customize specific configurations on your IP phone:

...

1. Get the IP address: Press Menu →Status →Information.
   Image Modified
2. Input the IP Address in the web browser.
3. Input the user name (default is admin), password (default is admin).
4. Login successfully.
   Image Modified

...

1. Press Menu → setting → Advanced settings → password (default admin) → Phone Setting → Set Password
2. Enter the current PWD (password), new password and confirm the new password.
3. Press save soft key or to save the new password.
   Image Modified

To change to password via Web Interface

1. Management → Password
2. Fill the value
3. Click to save the configuration.
   Image Modified

...

1. Press Menu→Setting→Advanced Settings (password: admin) →Network→WANPort →Static mode.
2. Enter the parameters: IP, Netmask, Gateway, Pri. DNS(primary dns), sec. DNS(second DNS) in the corresponding fields.
   Image Modified
3. Click Save and restart the phone.
   Image Modified
   Press the Save soft key to accept the change or the Back soft key to cancel. If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain the IP address. Contact your system administrator for the PPPoE user name and password. 

To configure PPPoE via phone interface:

1. Press Menu→Setting→Advanced Settings (password: admin) →Network→WANPort →PPPoE mode.
2. Enter the User ID and password
3. Click Save and restart the phone.
   Image Modified

To configure DHCP via phone interface:

...

1. Click Network→Basic
2. Select the desired Type: DHCP, Static or PPPoE
3. Filled the necessary information.
4. Click the SaveSet and restart the phone.
   Image Modified

...

1. Click Network→Basic
2. Select
3. Click and restart the phone
   Image Modified

To configure Router via web interface:

1. Click Network→Basic
2. Select As Router
3. Fill the IP address and other necessary information.
4. Click and restart the phone
   Image Modified

Language

The default Phone interface language is English.
To change the language via Phone interface

1. Press Menu → Setting → Basic Settings → Language.
2. Press or Save soft key to save the configuration.
   Image Modified

To change the language via Web Interface

...