...
- Press Menu→Setting→Advanced settings(default password:admin)→Accounts
- Select the desired account
- Select Enable for Account active
- Filled the SIP Server
- Filled the Failover SIP server if need (Optional)
- Filled the Outbound Proxy (Optional)
- Filled the SIP User ID, Authenticate ID
- Filled the password, Name (shown on LCD) and Ringtone.
- Press Save to save the configuration.
Note:
If there is a port of sip server, you need to press "1" on the keypad, then you will find the ":".
Additional Information:
When the current input method is ABC/abc/2ab,
Pressing "1", you will find ", . ?:;"
Pressing "0", you will find " < >(){}[]"
Pressing "*", you will find "*/"!@$"
Pressing "#", you will find "#'%&*|"
To register via web interface:
...
Name | Description |
1. Date&Time | It shows the phone's time & date. For Date&time setting, see Time&Date |
2. Notice | It shows the phone features status, More see Icon Preview |
3. Line Keys | This area shows the four line key labels. Line keys are also can be used as other function keys. For more information you can refer to Memory Line Keys |
4. Soft Key | This area shows the soft key labels. The default soft key labels are "History", "Directory", "DND" and "Menu". More to see Programmable Key |
5. Default Account | This shows the current use account. User can use |
6. Wallpaper | This shows the backgrounds picture. You can also change it. For more information you can refer to Wallpaper. |
...
Option | |
Status | Model |
IP | |
MAC | |
Firmware | |
Hardware | |
Network | |
Account | |
Device Cert | |
Language | |
Features | Call Forward |
Function Key(Line key setting) | |
Key as Send | |
Hot Line | |
Anonymous Call | |
DND | |
History Setting | |
Basic Settings | Language |
Time & Date | |
Time & Date Format | |
DHCP Time | |
Ring tone | |
Advanced Settings | Account |
Network | |
Factory Reset | |
Auto provision | |
Directory | All Contacts |
Local Contacts | |
Remote Contacts | |
Broadsoft Contacts | |
Blacklist Contacts | |
AP Contacts | |
History | Local History |
Network CallLog | |
Message | Voice Mail set and View. Text Message view and set. |
Display | Display Mode |
Wallpaper | |
Screensaver | |
Others | Factory Function |
System Restart | |
Device Reboot | |
Pcap Feature | |
Line Key Function Overview
...
To upgrade via HTTP, the "Management"→"auto provision" →" Firmware Upgrade"→ "Upgrade Mode" field needs to be set to HTTP, respectively. "Firmware Server Path" needs to be set to a valid URL of a HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid URL.
e.g. firmware.mycompany.com:5688/Hanlong
e.g. www.mycompany.com:5688/fm/ Hanlong
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root/fm directory of the HTTP server.
(3) Visiting "HTTP:\\192.168.0.254\fm\fw8xx.rom on localhost by browser" to verify the HTTP Server. If visiting "HTTP: \\192.168.0.254\fm\fw8xx.rom on other computer is no prompt to download fw8xx.rom file, please check the firewall (Suggest close the firewall).
To configure the server path via web interface:
...
- Hanlong recommends end-user use the Hanlong HTTP server. For large companies, we recommend to maintain their own TFTP/HTTP/FTP/HTTPS server for upgrade and provisioning procedures.
- Once a "Firmware Server Path" is set, user needs to update the settings and restart the IP Phone. If the configured firmware server is found and a new code image is available, the UC8xx will attempt to retrieve the new image files by downloading them into the UC8xx's SDRAM. During this stage, the UC8xx's LEDs will blink fastly until the checking/downloading process is completed. Upon verification of checksum, the new code image will then be saved into the Flash. If TFTP/HTTP/FTP/HTTPS fails for any reason (e.g. TFTP/HTTP/FTP/HTTPS server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the UC8xx will stop the TFTP/HTTP/FTP/HTTPS process and simply boot using the existing code image in the flash.
- Firmware upgrade may take as long as 3 to 8 minutes over Internet, or just 1 minutes if it is performed on a LAN. It is recommended to conduct firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server.
- Hanlong's latest firmware is available at http://www.htek.com →Support→Firmware Download.
- Oversea users are strongly recommended to download the binary files and upgrade firmware locally in a controlled LAN environment.
...
- Click About AP Phonebook
All Documents
- Click Documents Guide, you can get all tech files.