Versions Compared

Old Version 5

changes.mady.by.user HTEK_admin (Unlicensed)

Saved on

compared with

New Version 6

changes.mady.by.user HTEK_admin (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Hardware Overview

LEDs

1. Power Indicator: Steady green when power on, blinking green when the call is ringing.
2. Line Keys
Steady green: during the conversation, or plan to dial a call.
Blinking red: the call is ringing.
Off: idle interface

Place a call

Three ways to make a call:

1) Handset: Pick up the handset; enter the number, and then press the send soft key

or press Image Modified .

2) Speaker: Press Image Modified or the line keys; enter the number, and then press the send soft

key or press Image Modified .

3) Headset: Press Image Modified ; enter the number, and then press the send soft key or press Image Modified .

Note: You can also use Contacts or call log to dial the number you want, press place the call by the three ways mentioned. More, you can also alternate the mode during the call.

End a call

To end a call in three different modes:

1) Handset: hang up the handset or press the cancel soft key.

2) Speaker: press Image Modified , or press the cancel soft key

3) Headset: press the cancel soft key.

Answer a call

1) Handset: pick up the handset;

2) Speaker: press Image Modified ;

3) Headset: press Image Modified .

Note: You can also reject the call by press the Reject soft key.

Redial

Press Image Modified to redial the last call that dialed.

Hold

Press Image Modified or press the hold soft key during a call to hold the call,

Press or resume soft key to resume the call.
Call Transfer
Blind Transfer
a. Press the transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfers to.
c. Press the transfer soft key, and now the blind transfer completed.
Attended Transfer (at least one line key set as Auto)
a. Press the transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfer to, and press the send soft key or .
c. Start the second conversation, press the transfer soft key, then, transfer completed.
Semi-Attended Transfer (at least one line key set as Auto)
a. Press the transfer soft key during the conversation, the call is on hold now.
b. Enter the number transfer to, and then press , then you can hear the ring tone.
c. Press the transfer soft key, and now the Semi-attended transfer completed.
Call Conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press line 2, the call is placed on hold.
2) A enter the number of C and then press send soft key or . C answers the call.
3) A press the conference soft key, then A, B and C are now in a conference.
4) If add D&E, press Line 3, the current conference is on hold, dial D and press , the four are in conference. Press line 4, and dial E, press , then A,B,C,D,E are in conference.

...