...
Note: This section shows you how to install an active directory on Microsoft Windows Server 2008 or Microsoft Windows Server 2008 R2 Enterprise 64-bit system.
1.1 Click Start?Run.
1.2 Enter dcpromo in the pop-up dialogue box and click "ENTER".
1.3 The Active Directory Domain Services Installation Wizard will appear after a short while, click "Next":
1.4 Popup hint window, click "ok".
1.5 Read the provided information and click "Next":
1.6 Mark the "Create a new domain in a new forest" radio box and click "Next".
Note: We recommend that you set a strong password for the local Administrator account before you create the new domain.
1.7 Enter an appropriate domain name for the forest root domain and click "Next":
The wizard will check if the domain name is in use on the local network:
1.8 Select the desired forest functional level from the pull-down list of "Forest functional level", and click "Next".
For more information, click "domain and forest functional levels":
1.9 Select the desired domain functional level from the pull-down list of "Domain functional level", and click "Next".
For more information, click "domain and forest functional levels".
1.10 Select additional options for this domain controller if required, and click "Next".
1.11 The wizard will prompt a warning about DNS delegation. Since no DNS has been configured yet, you can ignore the message and click "Yes".
1.12 Specify the desired paths for the database, log files and SYSVOL folders, and click "Next".
For more information, click "placing Active Directory Domain Services files".
1.13 Configure the password for the active directory recovery mode, and click "Next".
For more information, click "Directory Services Restore Mode password".
The password should be complex and at least 7 characters long.
1.14 Review your selection and click "Next".
The wizard will prompt that the system begins to create the Active Directory Domain Services.
1.15 Click "Finish" to complete and exit the wizard:
| Anchor | ||||
|---|---|---|---|---|
|
You should also install the Active Directory Lightweight Directory Services role on Windows Server 2008 system.
2.1 Click Start->Administrative Tools->Server Manager.
2.2 Right click "Roles", and then select "Add Roles".
2.3 The Add Roles Wizard will pop up, click "Next".
2.4 Check the "Active Directory Lightweight Directory Services" checkbox and click "Next".
2.5 Follow the default settings and click "Next".
2.6 When the installation is completed, click "Close".
After the installation succeeds, you will find the "Active Directory Lightweight Directory Services" role listed in roles of the server manager.
...
To add an entry to the Active Directory:
3.1 Click Start->Administrative Tools->Server Manager.
3.2 Double click Roles->Active Directory Domain Services->Active Directory Users and Computers.
3.3 Double click the domain name created above (e.g., ldap.htek.com), and then select Users->New->Contact.
3.4 Enter the desired name of the Contact.
3.5 Click "OK" to accept the change, you can see the added contact in the Users field.
| Anchor | ||||
|---|---|---|---|---|
|
...
To configure LDAP feature via web user interface:
4.1 Press the "OK" key on the phone when it is idle to obtain the IP address.
4.2 Enter the IP address (e.g., http://192.168.0.100 or 192.168.0.100) in the address bar of web browser on your PC and then press Enter.
4.3 Enter the user name and password in the login page.
The default login user name is admin (case-sensitive) and the password is admin (case-sensitive).
4.4 Click on Directory->LDAP.
4.5 Enter the desired values in the corresponding fields.
The screenshot for reference is shown as below:
4.6 Click "SaveSet" to accept the change.
| Anchor | ||||
|---|---|---|---|---|
|
...