Page Comparison

AnchorOLE_LINK3OLE_LINK3 AnchorOLE_LINK4OLE_LINK4






How to Use TR069
on Htek IP Phones





























Version 2.0.4.4.24
Feb. 2018

...

This technote mainly provides a general introduction of TR069 (Technical Report 069) and the way of enabling the TR069 on the Htek IP phones. The information in this document is restricted to the following Htek IP phone models with firmware version 1.0.3.85 or later:

TR069 introduction

...

TR069 is a technical specification, which is defined by the Broadband Forum. It defines a mechanism that encompasses secure auto-configuration of a CPE (Customer-Premises Equipment), and also incorporates other CPE management functions into a common framework. TR069 uses common transport mechanisms (HTTP) for communication between CPE and ACS (Auto Configuration Servers). The HTTP messages contain XML-RPC methods defined in the standard for configuration and management of the CPE. The protocol addresses different Internet access devices such as modems, routers, gateways, set-top boxes, and VoIP-phones for the end-users.

...

TR069 feature is disabled on the IP phone by default. You can enable or disable the TR069 feature using the configuration files or web interface.
To configure TR069 using the AnchorOLE_LINK107OLE_LINK107 AnchorOLE_LINK108OLE_LINK108 configuration files:

1. Set the following parameters:
   OLE_LINK90

   TR069 >TR069 Enable

   OLE_LINK94

   anchor

   OLE_LINK92

   OLE_LINK98

   OLE_LINK100

   OLE_LINK102

   OLE_LINK103

   OLE_LINK106

   Web Setting Path	Permitted Values	Descriptions	Parameter	Default Value
   Anchor
   OLE_LINK89	OLE_LINK89
   Anchor
   OLE_LINK90
   Setting->TR069->
   Anchor
   OLE_LINK87	OLE_LINK87
   Anchor
   OLE_LINK88	OLE_LINK88	Number: 0, 1	TR069 Enable (In Use). 0 - No, 1 - Yes	P8100	0
   Anchor
   OLE_LINK93	OLE_LINK93
   Anchor
   OLE_LINK94
   Setting->TR069-> ACS URL	String	Specifies the URL of ACS used to establish the TR069 session with the ACS.	P8101	Blank
   Anchor
   OLE_LINK95	OLE_LINK95	OLE_LINK96	OLE_LINK96
   Setting->TR069-> ACS Username
   Anchor
   OLE_LINK91	OLE_LINK91
   Anchor
   OLE_LINK92	String	Specifies the username used for HTTP authentication against the ACS.
   Anchor
   OLE_LINK97	OLE_LINK97
   Anchor
   OLE_LINK98	P8102	Blank
   Anchor
   OLE_LINK99	OLE_LINK99
   Anchor
   OLE_LINK100
   Setting->TR069-> ACS Password	String	Specifies the password used for HTTP authentication against the ACS.	P8103	Blank
   Anchor
   OLE_LINK101	OLE_LINK101
   Anchor
   OLE_LINK102
   Setting->TR069->Enable Periodic Inform	Number: 0, 1	Enables or disables the phone to report its configuration information to the ACS.0 –No,1 - Yes	P8104	0
   Anchor
   OLE_LINK103
   Anchor
   OLE_LINK104	OLE_LINK104
   Setting->TR069-> Periodic Inform Interval(seconds)	Integer	Sets the interval (in seconds) to report its configuration information to the ACS.	P8105	60
   Anchor
   OLE_LINK105	OLE_LINK105
   Anchor
   OLE_LINK106
   Setting->TR069-> Connection Request Username	String	Sets the username used to authenticate the incoming connection requests.	P8106	Blank
   Setting->TR069-> Connection Request Password	String	Sets the password used to authenticate the incoming connection requests.	P8107	Blank

2. Store the configuration files to the root directory of the configuration server.

...