Page Comparison

1. Batch file convert(Please install Cooledit tool first)
   1a:Select the Original ringtone file.
   
   
   
2. Resample:

   2a:Click the "Resample" button go to the resample page. Then click the "Change Destination Format" button in the resample page.
   2b:Change the destination format to "Sample Rate: 8000 & Channels: Mono & Resolution: 16-bit"; 
   

   
   

3. Chose new file format and format properties
   3a:Click "New format " button

   3b:Set the Output Format to "PCM Raw Date(*.pcm)".
   3c:Set the Sample Format Types to "8000Hz,16-bit,Mono".
   3d:click "Format Properties..." button, select "16-bit PCM(LSB, MSB)" 
   

4. Choose destination folder and file renaming scheme
   4a:Click the "Destination" folder.

   4b:Chosedestination folder as you need 

5. Click the "Run Batch" button
   

   

6. You could install the tool of Cooledit to make the ringtone you like.
   [Note]:
   6a. The ringtone which you update must less than 64k in total;
   6b. The parameter of ringtone is “Sample Rate: 8000 & Channels: Mono & Resolution: 16-bit linear, little-endian”;
   6c. The ringtone format is “*.bin”
   
   

7. Cut the he originalringtone file in to appropriate size.
   7a: Open the original ringtone file
   

   7b:select the segment of ringtone(Ctrl + C)
   7c:Creat a new file via File?New.
   7d:Paste it to the new created file(Ctrl + V).
   Note: The ringtone format as picture:
   7e:Save the ringtone via File→Save As..
   Note: please choose the save type as which the originalringtone file is. 
   
   

8. Make the .bin format ringtone by .pcm format files.
   8a:Go to destination folder you will see the new .pcm files.
   8b:Double click the "ringtool.exe".
   8c:Choes the new .pcm files as input file and then click the "GanerateRingfile" button 
   Then you will get a file named "ring1.bin".This is the ringtone file which you can upload to our phone.
   Please Note: Our phone just support ringtone 4/5/6/7/8 can be upload. Please rename "ring1.bin" to ring4.bin/ ring5.bin/ ring6.bin/ ring7.bin/ ring8.bin. 
   
   

9. Provision ringtone.
   8a:Set up a http/https/tftp/ftp server.
   8b: Go to Webpage -> Management -> Auto provision -> Ring Server Path. In the option, fill in your server path. 
   If you want to auto provision this option, please set P20174 = http://192.168.0.70/ringtone/
   8c:Put the ringtone file into the server path.
   8d: Restart IP phone.

...