...
- Batch file convert(Please install Cooledit tool first)
1a:Select the Original ringtone file.
- Resample:
2a:Click the "Resample" button go to the resample page. Then click the "Change Destination Format" button in the resample page.
...
2b:Change the destination format to "Sample Rate: 8000 & Channels: Mono & Resolution: 16-bit";
- Chose new file format and format properties
3a:Click "New format " button
...
3b:Set the Output Format to "PCM Raw Date(*.pcm)".
3c:Set the Sample Format Types to "8000Hz,16-bit,Mono".
3d:click "Format Properties..." button, select "16-bit PCM(LSB, MSB)"
...
- Choose destination folder and file renaming scheme
4a:Click the "Destination" folder.
...
4b:Chosedestination folder as you
...
need
- Click the "Run Batch" button
- You could install the tool of Cooledit to make the ringtone you like.
...
- [Note
...
- ]:
...
6a.
...
- The
...
- ringtone
...
- which
...
- you
...
- update
...
- must
...
- less
...
- than
...
- 64k
...
- in
...
- total;
...
6b.
...
- The
...
- parameter
...
- of
...
- ringtone is “Sample Rate: 8000 & Channels: Mono & Resolution: 16-bit
...
- linear,
...
- little-
...
- endian”;
...
6c.
...
- The
...
- ringtone
...
- format
...
- is
...
- “*.
...
- bin”
Cut the he originalringtone file in to appropriate size.
7a: Open the original ringtone file
7b:select the segment of ringtone(Ctrl + C)
...
7c:Creat a new file via File?New.
...
7d:Paste it to the new created file(Ctrl + V).
Note:
...
The ringtone format as picture:
7e:Save the ringtone
...
via File
...
→Save As..
Note:
...
please choose the save type as which the originalringtone file is.
Make the .bin format ringtone by .pcm format files.
8a:Go to destination folder you will see the new .pcm files.
...
8b:Double click the "ringtool.exe".
8c:Choes the new .pcm files as input file and then click the "GanerateRingfile"
...
button
...
Then you will get a file named "ring1.bin".This is the ringtone file which you can upload to our phone.
Please Note: Our phone just support ringtone 4/5/6/7/8 can be upload. Please rename "ring1.bin" to ring4.bin/ ring5.bin/ ring6.bin/ ring7.bin/ ring8.bin.- Provision ringtone.
8a:Set up a http/https/tftp/ftp server.
8b: Go to Webpage -> Management -> Auto provision -> Ring Server Path.
...
- In the option, fill in your server path.
...
- If you want to auto provision
...
- this option, please set P20174 = http://192.168.0.70/ringtone/
8c:Put the ringtone file into the server path.
8d: Restart IP phone.