Page Comparison

Image Added

Image Added

1. Batch file convert(Please install Cooledit tool first)

Image Added
1a:Select the Original ringtone file.
Image Added

1. Resample:

2a:Click the "Resample" button go to the resample page. Then click the "Change Destination Format" button in the resample page.
Image Added
2b:Change the destination format to "Sample Rate: 8000 & Channels: Mono & Resolution:16-bit";
Image Added

1. Chose new file format and format properties

3a:Click "New format " button
Image Added
3b:Set the Output Format to "PCM Raw Date(*.pcm)".
3c:Set the Sample Format Types to "8000Hz,16-bit,Mono".
3d:click "Format Properties..." button, select "16-bit PCM(LSB, MSB)"
Image Added "

1. Choose destination folder and file renaming scheme

4a:Click the "Destination" folder.
Image Added
4b:Chosedestination folder as you need

1. Click the "Run Batch" button

Image Added

1. You could install the tool of Cooledit to make the ringtone you like.

\[Note\]: 6a. The ringtone which you update must less than 64k in total; 6b. The parameter of ringtone is<ac:structured-macro ac:name="anchor" ac:schema-version="1" ac:macro-id="7fc1cc81-c7f0-4d33-9950-e56d25d96af9"><ac:parameter ac:name="">OLE_LINK1</ac:parameter></ac:structured-macro> "Sample Rate: 8000 & Channels: Mono & Resolution:16-bit linear, little-endian"; 6c. The ringtone format is "*.bin"

1. Cut the he originalringtone file in to appropriate size.

7a: Open the original ringtone file
Image Added 7b:select the segment of ringtone(Ctrl + C)
Image Added
7c:Creat a new file via File?New.
Image Added
7d:Paste it to the new created file(Ctrl + V).
Note: The ringtone format as picture:
Image Added
7e:Save the ringtone via File?Save As..
Note: please choose the save type as which the originalringtone file is.

1. Make the .bin format ringtone by .pcm format files.

8a:Go to destination folder you will see the new .pcm files.
Image Added
8b:Double click the "ringtool.exe".
8c:Choes the new .pcm files as input file and then click the "GanerateRingfile" button
Image Added
Then you will get a file named "ring1.bin".This is the ringtone file which you can upload to our phone.
Please Note: Our phone just support ringtone 4/5/6/7/8 can be upload. Please rename "ring1.bin" to ring4.bin/ ring5.bin/ ring6.bin/ ring7.bin/ ring8.bin.

1. Provision ringtone.

8a:Set up a http/https/tftp/ftp server.
8b: Go to Webpage -> Management -> Auto provision -> Ring Server Path.

Image Added