Zero Touch

Zero Touch allows you to configure the network parameters and provisioning server address via phone user interface during startup. This feature is helpful when there is a system failure on the IP phone. To use Zero Touch, make sure this feature is enabled.

You can use this feature to configure network parameters and auto provision quickly.

...

1. Enter the zero touch screen (have two way, do one of the following)

2. Auto enter the zero touch screen when phone startup, you need enable zero touch active via web interface

3. Enter the desired waiting time in the Wait Time(1~100s) field.

The default value is 5.

web path: Management->Auto Provision->Firmware Upgrade->Zero Active

Image RemovedImage Added

Manual trigger by the Zero Touch key to enter the zero touch screen, You can set it via web interface or phone interface

...

1. Press Menu→ Features→ Function Keys→ Line Keys as Function Keys→ Line Key2(for example)

2. Press

   Image RemovedImage Added

   and

   Image RemovedImage Added

   key to select the Zero Touch in the Type field.

3. Press

   Image RemovedImage Added

   or Save soft key to save the configuration.

...