...

Screensaver default is Off, you can change configuration parameter to activate the Screensaver :
For more information on customizing screensaver, please refer to <<LCD and Web GUI custom Guide >> in page 68.

...

Please note:If your phone default setting is as below: 
Currently Htek Phone does not support pre_configuration and configutration Redirection, please refer to section 6 in page 24.
For mass deployment, we provide TFTP/HTTP redirection service. By default, all Htek products point to our provisioning system. When a unit is powered up, it will automatically contact our provisioning server. Our provisioning server will redirect the unit to customer's TFTP/FTP/HTTP/HTTPS server. The unit will reboot and send further provisioning request to ask for configuration file (or firmware file) from customer's TFTP/FTP/HTTP/HTTPS server.
Below is the information that we need from service providers for TFTP/HTTP redirection:

1. MAC address range, this should be printed on the carton box

2. Your TFTP/FTP/HTTP/HTTPS server IP address

3. Your company name and address

Here are the things that service providers should do:

1. Create configuration files for all the devices and put them on your TFTP/HTTP server.

2. Download the latest official release from www.htek.com/support/Document_And_Firmware and put them on your TFTP/FTP/HTTP/HTTPS server (same directory as above)

3. After we inform you that the devices have been entered into our central provisioning database, please take out a few devices to test. Upon powering up, they should contact our provisioning server https://rps.htek.com/index.php/fn/g first, and then get redirected to your TFTP/FTP/HTTP/HTTPS server and pull out the configuration files and the firmware files. They will be upgraded to the latest firmware with your configurations.

Back to Top

14. Automatic Provisioning Within LAN

...