This section introduces SEVEN ways of making IP devices connect to HDMS depends on TWO scenarios.
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Scenario A
If the default P value of HDMS in the configuration file of a device is set in advance, it will connect to HDMS automatically after powering up. You just need to upload the info of devices in HDMS, follow the steps below.
...
| Info |
|---|
In Status, Offline means the device is disconnected. Unregistered or Registered means the device is connected. |
Scenario B
If the default P value of HDMS in the configuration file of a device is not set in advance, a device has to request and get a configuration file, which contains the parameters of HDMS, from a server. You have SIX options.
...
| Info |
|---|
To find the PIN of an account, click Account Management → Account → choose an account in the list → click 
|
Power up the device/ Reboot the device/ Click Auto Provisioning Now on the device’s web page.
...
The table below shows the results of different scenes whether you choose a site and account(s) info when adding a device.
0: Do not choose one when adding a device in the list.
1: Do choose one when adding a device in the list.
AP: Auto Provisioning.
Site | Account | Result | Description |
|---|---|---|---|
0 | 0 | Type in UID and PIN after AP on the LCD of the device. | The device is not assigned to any site or account. |
1 | 0 | Type in PIN after AP on the LCD of the device. | The device belongs to a site, but has to type PIN to register an account. |
0 | 1 | Type in UID after AP on the LCD of the device |
...
To find the PIN of an account, click Account Management → Account → choose an account in the list → click 
. On the Update page, you can set a PIN for the account.
...
. | The device has to type UID to get set in a site. Then the device is assigned to a site and accounts. | ||
1 | 1 | (None) | The device is assigned to a site and accounts after AP. |
Power up the device/ Reboot the device/ Click Auto Provisioning Now on the device’s web page.
Result
In Device Management -> Device List, the Status shows the connection between the device and HDMS. Offline means the device is disconnected. Unregistered or registered means the device is connected.
...