...
- Directory → Directory → Contact
- Choose the Ring Tone you want to use.
- Click
→ 
to save the configuration.
Click Ring Tones for more information.
Volume
...
- Click Setting→ Action URL
- Fill the needed values in the designated blank spaces.
- Click
to save the setting.
Click Action URL & URI for more how to use, or check on www.htek.com
...
To upgrade via HTTP, the "Management"→"auto provision" →" Firmware Upgrade"→ "Upgrade Mode" field needs to be set to HTTP, respectively. "Firmware Server Path" needs to be set to a valid URL of a HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid URL.
e.g. firmware.mycompany.com:5688/Htek
e.g. www.mycompany.com:5688/fm/Htek
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root/fm directory of the HTTP server.
(3) Visiting "http://192.168.0.254/fm/fw902.rom on localhost by browser" to verify the HTTP Server. If visiting "http://192.168.0.254/fm/fw902.rom on another computer and it not prompted to download fw902.rom file on this computer, please check if the firewall is on or off (Suggest you turn off the firewall).
To configure the server path via Web interface:
...
- Click Setting→ Tones
- Define the dial tone, ringing, busy tone…
- For the tones, you can check with your system administrator.
- For more Click Configure Ring TonesTone.
How to download XML Configuration?
...
How to use Open VPN?
- Click Open VPN OpenVPN Guide
Provisioning Guide on Free PBX
...