...
You can view the system status of your phone via phone user interface or web user interface. The information of phone status includes: Information(e.g., Model, IP, MAC, Firmware, Hardware), Network(e.g., WAN Type, IP, Mask, LAN Type, Gateway, DNS… )Account (e.g., register status of accounts)
To view the phone status via phone interface:
- Press Menu →Status →InformationNetwork/ Account→Information
- Press Menu →Status →Network
- Press Menu →Status →Account
...
- Press Menu→ Setting→Advanced settings (default password: admin)→Accounts
- Select the desired account
- Select Enable for Account active
- Filled the SIP Server
- Filled the Failover SIP server if need (Optional)
- Filled the Outbound Proxy (Optional)
- Filled the SIP User ID, Authenticate ID
- Filled the password, Name (shown on LCD) and Ringtone.
- Press Save to save the configuration.
Note:
If there is a port of sip server, you need to press "1" on the keypad, then you will find the ":".
Additional Information:
When the current input method is ABC/abc/2ab,
Pressing "1", you will find ", . ?:;"
Pressing "0", you will find " < >(){}[]"
Pressing "*", you will find "*/"!@$"
Pressing "#", you will find "#'%&*|"
To register via web interface:
...
Name | Description |
1. Date&Time | It shows the phone's time & date. For Date&time setting, see Time&Date |
2. Notice | It shows the phone features status, More see Icon Preview |
3. Line Keys | This area shows the four line key labels. Line keys are also can be used as other function keys. For more information you can refer to Memory Line Keys |
4. Soft Key | This area shows the soft key labels. The default soft key labels are "History", "Directory", "DND" and "Menu". More to see Programmable Key |
5. Default Account | This shows the current use account. User can use |
6. Wallpaper | This shows the backgrounds picture. You can also change it. For more information you can refer to Wallpaper. |
...
Line Key Function Overview
...
Note: |
How to connect to
...
the UC46
Change the IP Phone to "Connect to Expansion Module." Through web UI.
...
- Click Setting→Action URL
- Filled the needed value in the necessary blank.
- Click
to save the setting.
Click Action URL & URI for more how to use, or check on www.htek.com
...
To upgrade via HTTP, the "Management"→"auto provision" →" Firmware Upgrade"→ "Upgrade Mode" field needs to be set to HTTP, respectively. "Firmware Server Path" needs to be set to a valid URL of a HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid URL.
e.g. firmware.mycompany.com:5688/Hanlong
e.g. www.mycompany.com:5688/fm/ Hanlong
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root/fm directory of the HTTP server.
(3) Visiting "HTTP:\\192.168.0.254\fm\fw8xx.rom on localhost by browser" to verify the HTTP Server. If visiting "HTTP: \\192.168.0.254\fm\fw8xx.rom on other computer is no prompt to download fw8xx.rom file, please check the firewall (Suggest close the firewall).
To configure the server path via web interface:
...
- Hanlong recommends end-user use the Hanlong HTTP server. For large companies, we recommend to maintain their own TFTP/HTTP/FTP/HTTPS server for upgrade and provisioning procedures.
- Once a "Firmware Server Path" is set, user needs to update the settings and restart the IP Phone. If the configured firmware server is found and a new code image is available, the UC8xx will attempt to retrieve the new image files by downloading them into the UC8xx's SDRAM. During this stage, the UC8xx's LEDs will blink fastly until the checking/downloading process is completed. Upon verification of checksum, the new code image will then be saved into the Flash. If TFTP/HTTP/FTP/HTTPS fails for any reason (e.g. TFTP/HTTP/FTP/HTTPS server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the UC8xx will stop the TFTP/HTTP/FTP/HTTPS process and simply boot using the existing code image in the flash.
- Firmware upgrade may take as long as 3 to 8 minutes over Internet, or just 1 minutes if it is performed on a LAN. It is recommended to conduct firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server.
- Hanlong's latest firmware is available at http://www.htek.com →Support→Firmware Download.
- Oversea users are strongly recommended to download the binary files and upgrade firmware locally in a controlled LAN environment.
...
- Click Setting→Tones
- Define the dial tone, ringing, busy tone…
- For the tones, you can check with your system administrator.
- More Click Tone Notes.
How to download XML Configuration?
...
How to use Open VPN?
- Click Open VPN note
Provisioning Guide on Free PBX:
...
- Click About AP Phonebook
All Documents
- Click Documents Guide, you can get all tech files.