Versions Compared

Version Old Version 16 New Version Current
Changes made by

HTEK_admin (Unlicensed)

HTEK

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Item

Description

LCD screen

To Presentation all information about the date& time, accounts, soft keys, messages, calls and other some information.

Power Indicator LED

To indicate the power status

Line keys

The phone supported up to 4 accounts

  1. Steady green: idle interface, during a call..
  2. Blink red: a call incoming

Soft keys

Labels automatically to identity their context-sensitive features.

Navigation keys

1. OK.
Up arrow key: To move up of the selection shows on the screen.
Right arrow key: To move right of the selection
shows on the screen.
Left arrow key: To move left of the selection shows on the screen.
Down arrow key: To move down of the selection shows on the screen.
1. To return to idle screen.
2. To cancel the information or call on the screen.

Mute key


1. To mute the voice during the call (green light).
2. To un-mute the call.

Memory Keys

To be configured as different function as:

  1. Line
  2. Speed Dial
  3. BLF
  4. BLF List
  5. Voice mail
  6. Direct Pickup
  7. Group Pickup
  8. Call Park
  9. Intercom
  10. DTMF
  11. Prefix
  12. Hold
  13. Conference
  14. DND
  15. Redial
  16. Transfer
  17. SMS
  18. Hot -desking
  19. Call Return
  20. Paging
  21. Record
  22. Shared Line
    The LED lights status when set as Shared line:
    Stay green: Idle
    Stay red: Busy 
    Blinked green: Ring Back
    Blinked red: A call incoming
    Steady orange: During a call
    Blinked orange: Public Hold
    Blinked green: Private Hold
    Light Drown: Unregistered

Speaker

Press this button to place a call in hands-free mode.

Volume


To decrease the volume.

To increase the volume.

Alphanumeric keypad

To enter the phone numbers, letters and so on.

Message

To indicator the New message, and press to read.

Headset

To indicate that the phone is or not in Headset mode.

...

  1. Click Setting→Action URL
  2. Filled the needed value in the necessary blank.
  3. Click to save the setting.

Click Action URL & URI for more how to use, or check on www.htek.com

...

  • Hanlong recommends end-user use the Hanlong HTTP server. For large companies, we recommend to maintain their own TFTP/HTTP/FTP/HTTPS server for upgrade and provisioning procedures.
  • Once a "Firmware Server Path" is set, user needs to update the settings and restart the IP Phone. If the configured firmware server is found and a new code image is available, the UC8xx will attempt to retrieve the new image files by downloading them into the UC8xx's SDRAM. During this stage, the UC8xx's LEDs will blink fastly until the checking/downloading process is completed. Upon verification of checksum, the new code image will then be saved into the Flash. If TFTP/HTTP/FTP/HTTPS fails for any reason (e.g. TFTP/HTTP/FTP/HTTPS server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the UC8xx will stop the TFTP/HTTP/FTP/HTTPS process and simply boot using the existing code image in the flash.
  • Firmware upgrade may take as long as 3 to 8 minutes over Internet, or just 1 minutes if it is performed on a LAN. It is recommended to conduct firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server.
  • Hanlong's latest firmware is available at http://www.htek.com→Support→Firmware Download.
  • Oversea users are strongly recommended to download the binary files and upgrade firmware locally in a controlled LAN environment.

...

  • Click Setting→Tones
  • Define the dial tone, ringing, busy tone…
  • For the tones, you can check with your system administrator.
  • More Click Tone Notes.

How to download XML Configuration?

...

How to use Open VPN?

Provisioning Guide on Free PBX:

...