Page Comparison

...

Htek UCV Series including below models:

This guide provides instructions on how to provision Htek IP Phone with the minimum settings.

...

When Htek IP Phone boots up, it will issue request one by one for these configuration files named "cfgDeviceCodecfgModelCode.xml" →  → "cfgMAC" →  → "cfgMAC.xml ".

DeviceCodeModelCode: Device Code is a short code represent one or one series model. e.g., device code 0012 represent represents UC924, so it uses cfg0012.xml; device code 0019 represent represents UC912 and UC912G,   so they both use cfg0019.xml.

MAC: The device MAC address, a unique 12-digit serial number of the phone. You can obtain it from the label back of the phone. And please note that it must be lowercase.

Although there are three types of configuration files the phone use, actually there are only two formats.

The format of file "cfgDeviceCodecfgModelCode.xml" is the same with "cfgMAC.xml", they use XML language to describe the configurations.

But the "cfgDeviceCodecfgModelCode.xml" could used use to provision all phones if they are the same model, at the same time, "cfgMAC.xml" is unique for every phone.

The file "cfgMAC" is also unique for every phone. But it is proprietary binary format and is usually be used for backup the configurations because it is encrypted when you download it. Thus, we don't recommend you use it to provision the phone.

Provisioning Flow Chart:

Note:

...

Htek IP Phone supports multiple language,you can modify the language and add a new language to the phone. The following table lists all available languages, associated language files and language template file:

Below picture shows a portion of LCD_English_Template.xml file:
English is the default language, you can change configuration parameter to other languages:
For more information on customizing an LCD language, please refer to <<LCD Language custom guide>> in page 62.

...

Htek IP Phone supports multiple language,you can modify the language and add a new language to the phone's webpage. The following table lists all available languages, associated language files and language template file:

Below picture shows a portion of Web_English_Template.js file:
English is the default language,you can change configuration parameter to other languages:
For more information on customizing web language file, please refer to << Web Language custom guide>> in page 64.

...

You can customize Htek UC923/UC924/UC926 IP phones' wallpaper.
Below table shows wallpaper's format and resolution for UC923/UC924/UC926 IP phones:

Wallpaper2 is default wallpaper, you can change configuration parameter to other wallpaper:
For more information on customizing wallpaper, please refer to <<LCD and Web GUI custom Guide >> in page 68.

...

You can customize Htek UC923/UC924/UC926 IP phones' screensaver.
Below table shows screensaver's format and resolution for UC923/UC924/UC926 IP phones:

Screensaver default is Off, you can change configuration parameter to activate the Screensaver :
For more information on customizing screensaver, please refer to <<LCD and Web GUI custom Guide >> in page 68.

...

You can customize Htek all phone models' weblogo on webpage.

For more information on customizing weblogo, please refer to << LCD and Web GUI custom Guide >> in page 68.

...

Version number and support files list:

Note:
When the phone which version is 1.0.3.71 or older upgrade to 1.0.3.73, phone will upgrade img_9xx.bin then automatically upgrade fw9xx.rom. fw9xx.rom is all-in-one firmware file. After upgrading to the 1.0.3.73 firmware, in the next time, phone will only need upgrade one file fw9xx.rom.

...

1. You need to contact us about how to obtain the Language.tar file.
2. Unzip the Language.tar using 7-zip tool. 
3. Open the Language folder:
Note: The file name must be " digital_" at the beginning,the format of the file name is the order of the on the LCD.
4. For example, custom Chinese Language
If your country's language is not existing in the language folder, you can new a xml file with correct naming format. [e.g. 13_xxx(xxx).xml]
If your country's language in the folder, you can custom directly your language.
Open the LCD_English_Template.xml with UltraEdit→ Translate English into Chinese (Can't leave out any items, otherwise the upgrade failed) →save as 10_简体中文(ChineseSimplified).xml in Language folder (Coding format is UTF-8)
→ Select the Language folder→ Compress Language.tar package using 7-zip tool and Cover the original→Delete the Language folder

If you want to put your language on the front of other languages, you can also rename the file, for example: 

...

1. You need to contact us about how to obtain the Language.tar file
2. Unzip the Language.tar using 7-zip tool. 
3. Open the Language folder:
Note: The file name must be " digital_letter" at the beginning. The format of the file name is the order of that on the Web.
4. For example, custom Chinese Language
If your country's language is not existing in the language folder, you can new a xml file with correct naming format. [e.g. 13_xxx.js]
If your country's language in the folder, you can custom directly your language reference Web_English_Template.js.
Open the Web_English_Template.js with UltraEdit→ Translate English into Chinese (Can't leave out any items, otherwise the upgrade failed) →save as 10_ChineseSimplified.js in Language folder (Coding format is UTF-8)
→ Select the Language folder→ Compress Language.tar package using 7-zip tool and Cover the original→Delete the Language folder

If you want to put your language on the front of other languages, you can also rename the file, for example: 
When you finish the Language.tar, you must send the Language.tar package to us, then we provide the firmware to you.

...