This paper is mainly introduce how to make a call by URL command.
| Table of Contents |
|---|
1. Action URL
Record the operation of phone, send these corresponding information to server; action
1.1 To configure Action URL via web interface:
1) Choose Setting->Action URL
2) Enter the Corresponding contents.
3) Click SaveSet to save the changes.
1.2 The Action URL variables supported are:
$mac --> current MAC address of the phone
$ip --> current IP address of the phone
$model --> the phone model
$firmware --> current firmware version of the phone
$active_url --> the SIP URI of the active outgoing identity
$active_user --> the user part of the SIP URI for the active outgoing identity
$active_host --> the host part of the SIP URI for the active outgoing identity
$local --> the SIP URI of the local identity (your phone's number)
$remote --> the SIP URI of the remote identity (the other party's phone number)
$display_local --> used to display your phone's display name
$display_remote --> used to display the other party's display name
$call_id --> the call-id of the active call
For example:
The action URL format is http://server ip address/variable value…
When set the following Action URL to the IP Phone(UC860, MAC-001FC11A8B6C, IP-192.168.0.157) incoming call:
192.168.0.252/$mac/$ip
When other phone call the ip phone then
192.168.0.252/ 001fc11a8b6c/192.168.0.157
2. URI: Remote control phone for corresponding operation
...
Please use the following URL to dial out or hang up a call.
http://admin:password@IPpassword@IP_Address/Phone_ActionURL&Command=%command%&Number=%number%&Account=%account%
For example:
When use the phone which IP address is 192.168.0.124 to call the number 206 via the account 1, the action URI is:
http://admin:admin@192admin@192.168.0.124/Phone_ActionURL&Command=1&Number=206&Account=1
Notes: |
2.2 The other actions:
2.2.1 The URI format is as follow:
http://admin:password@IP_Address/Phone_ActionURL&Command=%command%&key=%key_vaule%
Notes: 2. You also can input the URI as follows for this action fuction: http://admin:password@IP_Address/Phone_ActionURL&key=%key_vaule% |
2.2.2 the current support key
To answer the call: key=OK/key=ENTER
To turn on speaker mode: key=SPEAKER
Press transfer button: key=F_TRANSFER
Increasing the volume: key=VOLUME_UP
Reduce the volume: key=VOLUME_DOWN
To mute the call: key=MUTE
To hold the call: key=F_HOLD
To end the call: key=X
To enter the DTMF number(include Numeric, * or # keys): key=0-9 * POUND
Press a line key: key=L1-L4
Press a DSS key: key=D1-D10
Press Conference button: key=F_CONFERENCE
Press a soft key: key=F1-F4
Press Message button: key=MSG
Press Headset button: key=HEADSET
Press RD button: key=RD
Press navigation key: key=UP/ DOWN/ LEFT/ RIGHT
To reboot the phone: key=Reboot
To check the Auto provision: key=AutoP
To enable DND: key=DNDOn
To disable DND: key=DNDOff
For example:
When use the "action URI" to mute the call, you can send the action URI as follows:
http://admin:password@IP_Address/Phone_ActionURL&key=MUTE
Notes: |