Hardware Overview
LEDs
1. Power Indicator: Steady green when power on, blinking green when the call is ringing.
2. Line Keys
Steady green: during the conversation, or plan to dial a call.
Blinking red: the call is ringing.
Off: idle interface
Place a call
Three ways to make a call:
1) Handset: Pick up the handset; enter the number, and then press the send soft key or press 
.
2) Speaker?: Press 
or the line keys; enter the number, and then press the send soft
key soft key or press .
3) Headset: Press 
; enter the number, and then press the send soft key or press .
Note: You can also use Contacts or call log to dial the number you want, press place the call by the three ways mentioned. More, you can also alternate the mode during the call. |
End a call
To end a call in three different modes:
1) Handset: hang up the handset or press the cancel soft key.
2) Speaker: press , or press the cancel soft key.
3) Headset: press the cancel soft key.
Answer a call
1) Handset: pick up the handset;
2) Speaker: press ;
3) Headset: press .
Note: You can also reject the call by press the Reject soft key. |
Hold
Press the hold soft key during a call to hold the call, Resume the soft key to resume the call.
Call Transfer
Blind Transfer
a. Press the transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfers to.
c. Press the transfer soft key, and now the blind transfer completed.
Attended Transfer (at least one line key set as Auto)
a. Press the transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfer to, and press the send soft key or .
c. Start the second conversation, press the transfer soft key, then, transfer completed.
Semi-Attended Transfer (at least one line key set as Auto)
a. Press the transfer soft key during the conversation, the call is on hold now.
b. Enter the number transfer to, and then press , then you can hear the ring tone.
c. Press the transfer soft key, and now the Semi-attended transfer completed.
Call Conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press line 2, the call is placed on hold.
2) A enter the number of C and then press send soft key or . C answers the call.
3) A press the conference soft key, then A, B and C are now in a conference.
4) If add D&E, press DSS key 1 (set DSS key as Line key), the current conference is on hold, dial D and press conference soft key, the four are in conference. Press DSS key 2, and dial E, press conference soft key, then A,B,C,D,E are in conference.
Note: |
Call Mute
Press 
to mute the microphone during the call
Press again to un-mute the conversation.
Instruction
Configuration
1. Configuration via Phone
a. Press Menu→Setting→Advanced Settings (Default password: admin)
b. Select Network: To configure the Wan Port (DHCP/Static/PPPoE), PC Port…
c. Select Accounts: To configure enable the account; fill the SIP SERVER, Outbound Proxy, ID…
d. Save the configuration
2. Configuration via Web
a. Get the IP address from the phone: Press Menu→ Status.
b. Login: input the IP address in the web browser. The PC and phone should be in the same segment) / Login name: admin password: admin (default)
c. Configure: select network/Account…to fill the relevant content.
d. Save the configuration, or if want to reboot, click the reboot button.
Support Contact
Nanjing Hanlong Technology Co., Ltd.
support@htek.com
Tel: 0086-25-84658050
Fax: 0086-25-84658319
www.htek.com
5th Floor, 1st Building Huashen Tech Park10 Huashen TempleYuhuatai Dis.
Nanjing 210012China
© Nanjing Hanlong Technology Co., Ltd. 2005-2018 All rights reserved.
...