Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Ring Tools: ringtool.exe
  1. Batch file convert(Please install Cooledit tool first)
    1a:Select the Original ringtone file.


  2. Resample:

    2a:Click the "Resample" button go to the resample page. Then click the "Change Destination Format" button in the resample page.
    2b:Change the destination format to "Sample Rate: 8000 & Channels: Mono & Resolution: 16-bit"; 


  3. Chose new file format and format properties
    3a:Click "New format " button

    3b:Set the Output Format to "PCM Raw Date(*.pcm)".
    3c:Set the Sample Format Types to "8000Hz,16-bit,Mono".
    3d:click "Format Properties..." button, select "16-bit PCM(LSB, MSB)" 

  4. Choose destination folder and file renaming scheme
    4a:Click the "Destination" folder.

    4b:Chosedestination folder as you need 

  5. Click the "Run Batch" button

  6. You could install the tool of Cooledit to make the ringtone you like.
    [Note]:
    6a. The ringtone which you update must less than 64k in total;
    6b. The parameter of ringtone is “Sample Rate: 8000 & Channels: Mono & Resolution: 16-bit linear, little-endian”;
    6c. The ringtone format is “*.bin”

  7. Cut the he originalringtone file in to appropriate size.
    7a: Open the original ringtone file

    7b:select the segment of ringtone(Ctrl + C)
    7c:Creat a new file via File?New.
    7d:Paste it to the new created file(Ctrl + V).
    Note: The ringtone format as picture:
    7e:Save the ringtone via File→Save As..
    Note: please choose the save type as which the originalringtone file is. 

  8. Make the .bin format ringtone by .pcm format files.
    8a:Go to destination folder you will see the new .pcm files.
    8b:Double click the "ringtool.exe".
    8c:Choes the new .pcm files as input file and then click the "GanerateRingfile" button 
    Then you will get a file named "ring1.bin".This is the ringtone file which you can upload to our phone.
    Please Note: Our phone just support ringtone 4/5/6/7/8 can be upload. Please rename "ring1.bin" to ring4.bin/ ring5.bin/ ring6.bin/ ring7.bin/ ring8.bin. 

  9. Provision ringtone.
    8a:Set up a http/https/tftp/ftp server.
    8b: Go to Webpage -> Management -> Auto provision -> Ring Server Path. In the option, fill in your server path. 
    If you want to auto provision this option, please set P20174 = http://192.168.0.70/ringtone/
    8c:Put the ringtone file into the server path.
    8d: Restart IP phone.


  • No labels