Vesion | Change Log |
---|---|
2.12.4.2.16 | Improve some of the parameters of information |
Vesion | Change Log |
---|---|
2.12.4.2.15 | Edited and published document |
BroadWorks software version: 21.sp1 |
Firmware version on Htek IP Phone: UC926: 2.12.4.2.16 UC924: 2.12.4.2.16 UC923: 2.12.4.2.16 UC903: 2.12.4.2.16 UC902: 2.12.4.2.16 |
Do Not Disturb (DND) allows all incoming calls to be rejected automatically. The BroadWorks server provides an option to play a ring splash reminder on the IP phone when the incoming call is rejected.
Forward Diversion: The call forward feature allows users to redirect an incoming call to a third party. This configuration is enabled as default. The call forward feature is based on a phone or a per-account basis depending on the call forward mode. IP phones support the following call forward behaviors: Always Forward, Busy Forward and No Answer Forward.
Related Features
Play Ring Reminder when a call is blocked:
Allow you to make your primary phone emit a short ring burst to inform you when the call is being sent to voice messaging by using the Ring Reminder.
Specify the return code and the reason:
Refuse feature defines the return code and reason of the SIP response message for the refused call.
Configuration Path: Group->User->Profile->Assign Services.
Configuration Path: Group->User->Incoming Calls->Do Not Disturb.
PlayRing Reminder when a Call is blocked:Enable/disable it according to your needs.
Configuration Path: Group->User->Utilities->Feature Access Codes.
Configure Htek IP Phone via Web interface
Configure Htek IP Phonevia auto provision
1.Set Sip Server Type.. 0– Default, 1– BroadSoft, 2 - Alcatel, 3 - Snom
<P8791 para="Account1.SIPServerType">1</P8791> |
2.Enable feature key synchronization; 0-Disabled (default), 1-Enabled. bw.feature_key_sync = 1
<P8633 para="Account1.FeatureKeySyn">1</P8633> |
4. Upload the template which you configured.
5.Set the auto provision
6.After save set, reboot your phone to provision.
Configuration Path: Group->User->Profile->Assign Services.
Configuration Path: Group->User->Incoming Calls->Call Forwarding Always.
PlayRing Reminder when a Call is forwarded:Enable/disable it according to your needs.
Configuration Path: Group->User->Utilities->Feature Access Codes.
Configure Htek IP Phone via Web interface
1.Configuration Path:Account->Advanced.
2.Set the Sip Server Type as Broadsoft and enable Feature Key Sync.
Configure Htek IP Phonevia auto provision
1.Set Sip Server Type.. 0– Default, 1– BroadSoft, 2 - Alcatel, 3 - Snom
<P8791 para="Account1.SIPServerType">1</P8791> |
2.Enable feature key synchronization; 0-Disabled (default), 1-Enabled. bw.feature_key_sync = 1
<P8633 para="Account1.FeatureKeySyn">1</P8633> |
4. Upload the template which you configured.
5.Set the auto provision
6.After save set, reboot your phone to provision.
Verify the DND feature
1. Press the DND button on phone's idle.DND Icon will display on phone's idle, Then phone will not receive any calls.
2. Press the DND button on phone's idle again. DND Icon will disappear on phone's,idle, Then phone will receive any calls.