Blue Tooth

The Model UC924E connects to a wide range of Bluetooth Headset, compatible with Bluetooth specification V4.0 and backwards compatible with 1.1, 1.2, 2.0 and 3.0.

How to Enable headset mode?

1) Find Menu then navigate as follows:Menu->Settings->Basic Setting->Headset:
2) Enable the Headset priority
3) Choose the "User HeadSet" or "Both" from "ringer Device for headset" option
4) Press the save button to save the configuration?
5) Press the headset key on phone's during the idle status when you accomplish the above-mentioned configuration. Headset icon will display on phone status bar

How to activate Bluetooth via phone interface?

1) Find Menu then navigate as follows:
Menu→ Settings→ Basic Setting→ Bluetooth
2) Press the save button to save the configuration.
3) You will see the Bluetooth icon on phone's homepage status bar during the idle status.
(This icon means that phone has no pair the Bluetooth device.)

How to activate Bluetooth feature via web interface?

1) Login the phone's webpage→ Setting→ Feature→ Bluetooth

How to open the Bluetooth pairing mode on Bluetooth headset?

1) Turn on the Bluetooth headset.
2) Long press the multifunction key on the Bluetooth headset until the indicator LED alternately flashes red and blue.
The Bluetooth headset is in pairing mode.

How to scan the Bluetooth headset device on phone interface?

1) Press the Scan button on phone interface.
2) The phone will enter the scan interface.
The phone starts searching for Bluetooth headsets within the working range of 32 feet.
3) There will displays all detected Bluetooth headsets on the phone.
4) Choose the desired Bluetooth Device from the list and connect to it.
5) If the Bluetooth Device connected/paired successfully, you will see the "Connect Success!"
and connected successfully icon.
6) When you back to idle interface, you will see the connected successfully icon.
Note: If the Bluetooth headset has a PIN, you need to configure the PIN via web interface: Default PIN is 0000.
1) Login the phone's webpage->Setting->Feature→Bluetooth

How to edit device information on phone interface?

1) Find Menu then navigate as follows:
Menu→Settings→Basic Setting→Bluetooth: Edit Device Information
2) Press the enter button, you can edit the Device Name.

How to adjust the earphone volume during a call?

With the Bluetooth headset paired, you can do the following:
Press the Volume key ( + ) on the Bluetooth headset to increase the volume.
Press the Volume key ( - ) on the Bluetooth headset to decrease the volume.

How to End Calls?

With the Bluetooth headset paired, press the multifunction key on the Bluetooth headset to end a call.

Troubleshooting

Why can't the phone detect the Bluetooth headset?

1) Ensure the Bluetooth headset is turned on.
2) Ensure the Bluetooth headset is in pairing mode, when the phone is searching for Bluetooth
headsets.

Why there is a noise?

1) Check the battery level. If the battery level is low, charge the Bluetooth headset.
2) Ensure the Bluetooth headset and the phone are within the working range of 10 meters (32 feet) and there is no obvious interference (walls, doors, etc.) between them.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

RF Power: WIFI:16dBm@11b, 14dBm@11g, 13dBm@11n BT:10dBm
Operating Frequency Range: 2.4GHz~2.4835GHz

Support Contact

Tel: 0086-25-84658050 | Fax: 0086-25-84658319 | Mail: support@htek.com | Web: www.htek.com
Add: 5th Floor, 1st Building Huashen Tech Park10 Huashen Temple Yuhuatai Dis Nanjing 210012 China
Copyright: © Nanjing Hanlong Technology Co., Ltd. 2005-2018 All rights reserved.

IP Phone

User Guide For Blue Tooth
--- UC924(E)

Browser not supported