Using Anywhere on Htek IP Phones with BroadSoft UC One

Document Revision History

Detail information for Broadworks and Htek IP Phone

Table of Contents
Application scenarios
Configuration on BroadWorks
Configure the BroadWorks Anywhere
Configuration on Htek IP Phones
ways to configure on IP Phones
Get the XSI information
Set the XSI information via phone web interface
Set the XSI information via Auto-Provisioning
Feature Show

Anchor
_Toc503516672 _Toc503516672

Anchor
_Toc465352814 _Toc465352814

Application scenarios

Call a Broadsoft Extension via Mobile or PSTN fixed line.

User A can add a Location, for example "London" with his Mobile or PSTN fixed line in London. He can use his Mobile or PSTN fixed line to call his colleague User B, and User B's phone would show the extension number of User A just like an internal calling.

Switch a call from Mobile to Desktop IP phones.

User A can add location named "Mobile" so that the phone number will be his own personal Mobile number and user A can receive incoming call when he is on his way back
to the office. He can switch the call from Mobile to Desktop IP phone when he is back to office.

Switch a call from Desktop IP phones to Mobile.

User A can add location named "Mobile" so that the phone number will be his own personal Mobile number . He can dial a certain string of number on Mobile to switch the call from Desktop IP phone to Mobile phone when user get a private call from desktop IP phone and he needs to go away from desk.

Anchor
_Toc503516673 _Toc503516673

Configuration on BroadWorks

Anchor
_Toc503516674 _Toc503516674

Configure the BroadWorks Anywhere

Enable the BroadWorks Anywhere feature for an user

Configuration Path: Group->Users->Call Control->BroadWorks Anywhere
Check "Alert all locations for Click-to-Dial calls" and "Alert all locations for Group Paging calls"
Note: This configuration only can be configured on the Broadworks
Image Added

To add a location

Configuration Path: Group->User->Call Control-> Broadworks anywhere->Add
Image Added
Phone Number: Input the number you want to bind with this location;
Description: You can choose to fill or leave it as blank;
Enable this Location/Enable Diversion Inhibitor/Use BroadWorks-Based Call Control Service: Check these three options;
Outbound Alternate Phone Number/SIP URI: Make sure this setting is the same as Phone number otherwise the location won't ring.
Note: This configuration only can be configured on the Broadworks then the Phone will synchronize the configuration after XSI is configured on the phone.

Check the feature codes

Configuration Path: Group->User->Utilities->Feature Access Codes
Image Added

Anchor
_Toc503516675 _Toc503516675

Configuration on Htek IP Phones

Anchor
_Toc503516676 _Toc503516676

ways to configure on IP Phones

Anchor
_Toc464907891 _Toc464907891

Anchor
_Toc1070 _Toc1070

Anchor
_Toc503516677 _Toc503516677

Get the XSI information

Host Server: The Host Server is your Broadworks Web Portal management address.
For example: http://xsp1.iop1.broadworks.net
(you can get this URL from Group->Resources->Identity/Device Profiles->Select an existing group identity/device profile->Device Type URL: http://domain)
XSI User ID: The User ID is in the profile of the User ID. It should contain the whole SIP URI.
For example: 2404984034@as.iop1.broadworks.net
Image Added
Password: The Password is the Broadworks Web access password of each user.

Anchor
_Toc503516678 _Toc503516678

Anchor
_Toc3763 _Toc3763

Anchor
OLE_LINK2 OLE_LINK2

Anchor
OLE_LINK1 OLE_LINK1

Set the XSI information via phone web interface

1. Directory?Network Directory

Image Added

Anchor
_Toc464907895 _Toc464907895

Anchor
_Toc30394 _Toc30394

Anchor
_Toc503516679 _Toc503516679

Set the XSI information via Auto-Provisioning

<P20944 para="BwXsiDir.AllowSipAuthForXsi">1</P20944>
<P20945 para="BwXsiDir.Host">%XSP_ADDRESS%</P20945>
<P20946 para="BwXsiDir.Port">80</P20946>
<P20947 para="BwXsiDir.ServerType">0</P20947>
<P20948 para="BwXsiDir.UserId">%BWLOGIN-ID-1%</P20948>
<P20949 para="BwXsiDir.PassWord">%BWAUTHPASSWORD-1%</P20949>

Anchor
_Toc503516680 _Toc503516680

Feature Show

Configure BroadWorks Anywhere via Phone interface:

1. Press Menu->Features->Call Control->Anywhere.
2. Press Add keys to add an number

Image Added Image Added
Image Added

1. Press the Save soft key to save change or the Cancel soft key to cancel.

Image Added

1. Press the Option key, you can delete or delete all numbers.

Image Added

1. Choose an number,Press the Enter key, you can view ,edit and delete the location:

Image Added