Document Revision History

Vesion	Change Log
2.12.4.2.15	Edited and published document

Detail information for Broadworks and Htek IP Phone

BroadWorks software version:

21.sp1

Firmware version on Htek IP Phone:

UC926: 2.12.4.2.15

UC924: 2.12.4.2.15

UC923: 2.12.4.2.15

UC903: 2.12.4.2.15

UC902: 2.12.4.2.15

Application scenarios

1. Call a Broadsoft Extension via Mobile or PSTN fixed line.

User A can add a Location, for example "London" with his Mobile or PSTN fixed line in London. He can use his Mobile or PSTN fixed line to call his colleague User B, and User B's phone would show the extension number of User A just like an internal calling.

2. Switch a call from Mobile to Desktop IP phones.

User A can add location named "Mobile" so that the phone number will be his own personal Mobile number and user A can receive incoming call when he is on his way back
to the office. He can switch the call from Mobile to Desktop IP phone when he is back to office.

3. Switch a call from Desktop IP phones to Mobile.

User A can add location named "Mobile" so that the phone number will be his own personal Mobile number . He can dial a certain string of number on Mobile to switch the call from Desktop IP phone to Mobile phone when user get a private call from desktop IP phone and he needs to go away from desk.

Configuration on BroadWorks

Configure the BroadWorks Anywhere

1. Enable the BroadWorks Anywhere feature for an user

Configuration Path: Group->Users->Call Control->BroadWorks Anywhere
Check "Alert all locations for Click-to-Dial calls" and "Alert all locations for Group Paging calls"
Note: This configuration only can be configured on the Broadworks

2. To add a location

Configuration Path: Group->User->Call Control-> Broadworks anywhere->Add
Phone Number: Input the number you want to bind with this location;
Description: You can choose to fill or leave it as blank;
Enable this Location/Enable Diversion Inhibitor/Use BroadWorks-Based Call Control Service: Check these three options;
Outbound Alternate Phone Number/SIP URI: Make sure this setting is the same as Phone number otherwise the location won't ring.
Note: This configuration only can be configured on the Broadworks then the Phone will synchronize the configuration after XSI is configured on the phone.

3. Check the feature codes

Configuration Path: Group->User->Utilities->Feature Access Codes

Configuration on Htek IP Phones

ways to configure on IP Phones

Access ways	Availability	How to access?
Phone interface	Not Available	N/A
Web interface	Available	Log in by IP Address(username: admin; password: admin)
Auto provision	Available	Use DMS

Get the XSI information

Host Server: The Host Server is your Broadworks Web Portal management address.
For example: http://xsp1.iop1.broadworks.net
(you can get this URL from Group->Resources->Identity/Device Profiles->Select an existing group identity/device profile->Device Type URL: http://domain)
XSI User ID: The User ID is in the profile of the User ID. It should contain the whole SIP URI.
For example: 2404984034@as.iop1.broadworks.net
Password: The Password is the Broadworks Web access password of each user.

Set the XSI information via phone web interface

Directory→Network Directory

Set the XSI information via Auto-Provisioning

<P20944 para="BwXsiDir.AllowSipAuthForXsi">1</P20944>
<P20945 para="BwXsiDir.Host">%XSP_ADDRESS%</P20945>
<P20946 para="BwXsiDir.Port">80</P20946>
<P20947 para="BwXsiDir.ServerType">0</P20947>
<P20948 para="BwXsiDir.UserId">%BWLOGIN-ID-1%</P20948>
<P20949 para="BwXsiDir.PassWord">%BWAUTHPASSWORD-1%</P20949>

Feature Show

Configure BroadWorks Anywhere via Phone interface:

Press Menu->Features->Call Control->Anywhere.
Press Add keys to add an number
Press the Save soft key to save change or the Cancel soft key to cancel.
Press the Option key, you can delete or delete all numbers.
Choose an number,Press the Enter key, you can view ,edit and delete the location: