Page Comparison

...

You can view the system status of your phone via phone user interface or web user interface. The information of phone status includes: Information(e.g., Model, IP, MAC, Firmware, Hardware), Network(e.g., WAN Type, IP, Mask, LAN Type, Gateway, DNS… )Account (e.g., register status of accounts)
To view the phone status via phone interface:

Press Menu →Status →InformationNetwork/ Account→Information
Press Menu →Status →Network
Press Menu →Status →Account

...

Press Menu→ Setting→Advanced settings (default password: admin)→Accounts
Select the desired account
Select Enable for Account active
Filled the SIP Server
Filled the Failover SIP server if need (Optional)
Filled the Outbound Proxy (Optional)
Filled the SIP User ID, Authenticate ID
Filled the password, Name (shown on LCD) and Ringtone.
Press Save to save the configuration.
Image RemovedImage Added

Note:
If there is a port of sip server, you need to press "1" on the keypad, then you will find the ":".
Additional Information:
When the current input method is ABC/abc/2ab,
Pressing "1", you will find ", . ?:;"
Pressing "0", you will find " < >(){}[]"
Pressing "*", you will find "*/"!@$"
Pressing "#", you will find "#'%&*|"
To register via web interface:

...

Name	Description
1. Date&Time	It shows the phone's time & date. For Date&time setting, see Time&Date
2. Notice	It shows the phone features status, More see Icon Preview
3. Line Keys	This area shows the four line key labels. Line keys are also can be used as other function keys. For more information you can refer to Memory Line Keys
4. Soft Key	This area shows the soft key labels. The default soft key labels are "History", "Directory", "DND" and "Menu". More to see Programmable Key
5. Default Account	This shows the current use account. User can use to change the default use account.
6. Wallpaper	This shows the backgrounds picture. You can also change it. For more information you can refer to Wallpaper.

...

Line Key Function Overview

...

Note:
All languages may not be available for selection. The available languages depend on the language packs currently loaded to the IP phone.

How to connect to

...

the UC46

Change the IP Phone to "Connect to Expansion Module." Through web UI.

...

Click Setting→Action URL
Filled the needed value in the necessary blank.
Click to save the setting.

Click Action URL & URI for more how to use, or check on www.htek.com

...

To upgrade via HTTP, the "Management"→"auto provision" →" Firmware Upgrade"→ "Upgrade Mode" field needs to be set to HTTP, respectively. "Firmware Server Path" needs to be set to a valid URL of a HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid URL.
e.g. firmware.mycompany.com:5688/Hanlong
e.g. www.mycompany.com:5688/fm/ Hanlong
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root/fm directory of the HTTP server.
(3) Visiting "HTTP:\\192.168.0.254\fm\fw8xx.rom on localhost by browser" to verify the HTTP Server. If visiting "HTTP: \\192.168.0.254\fm\fw8xx.rom on other computer is no prompt to download fw8xx.rom file, please check the firewall (Suggest close the firewall).
To configure the server path via web interface:

...

Hanlong recommends end-user use the Hanlong HTTP server. For large companies, we recommend to maintain their own TFTP/HTTP/FTP/HTTPS server for upgrade and provisioning procedures.
Once a "Firmware Server Path" is set, user needs to update the settings and restart the IP Phone. If the configured firmware server is found and a new code image is available, the UC8xx will attempt to retrieve the new image files by downloading them into the UC8xx's SDRAM. During this stage, the UC8xx's LEDs will blink fastly until the checking/downloading process is completed. Upon verification of checksum, the new code image will then be saved into the Flash. If TFTP/HTTP/FTP/HTTPS fails for any reason (e.g. TFTP/HTTP/FTP/HTTPS server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the UC8xx will stop the TFTP/HTTP/FTP/HTTPS process and simply boot using the existing code image in the flash.
Firmware upgrade may take as long as 3 to 8 minutes over Internet, or just 1 minutes if it is performed on a LAN. It is recommended to conduct firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server.
Hanlong's latest firmware is available at http://www.htek.com →Support→Firmware Download.
Oversea users are strongly recommended to download the binary files and upgrade firmware locally in a controlled LAN environment.

...

Check for any loose connections and that the phone has been installed properly. For the Installation instructions, refer to HU Phone InstallationUHInstallation.
Check whether dial tone is present on one of the audio modes.
Switch between the Handset, Headset (if present) or Hands-Free Speakerphone to check whether dial tone is present for one of the audio modes.
If the dial tone exists on another audio mode, connect a different handset or headset to isolate the problem.

Where to set the tone?

You can set the tone on web interface:

Click Setting→Tones
Define the dial tone, ringing, busy tone…
For the tones, you can check with your system administrator.
More Click Tone Notes.

How to download XML Configuration?

...

For Vlan information, please click VLAN Note

How to use LLDP?

For LLDP information, please click VLAN Note
VLAN Notes including:
1. Voice VLAN
2. Major Benefits of Using VLANs
3. VLAN discovery method on Htek ip phones
4. LLDP Feature on Htek IP Phones
5. Supported TLVS of IP Phones
6. Configuring LLDP Feature
7. DHCP VLAN
8. Open the DHCP VLAN on the Htek IP Phones
9. VLAN under Bridge Mode
10. VLAN underNAT Mode