...
For More detail, please refer to LDAP Notes.
Broadsoft Phonebook
You can access the BroadSoft directory through your phone. You can add local contacts from the BroadSoft directory. You can also dial a contact from the BroadSoft directory. You can configure your new phone to access up to 6 BroadSoft directories and every broadsoft directory support 100 contacts. Contact your system administrator for the access URL of the BroadSoft directory.
To Configure Broadsoft via web interface:
...
Note: |
Emergency Call
Public telephone networks in countries around the world have a single emergency telephone number (emergency services number), that allows a caller to contact local emergency services for assistance when required. The emergency telephone number may differ from country to country. It is typically a three-digit number so that it can be easily remembered and dialed quickly. Some countries have a different emergency number for each of the different emergency services.
You can specify the emergency telephone numbers on the IP phone for contacting the emergency services in an emergency situation.
To configure emergency call via web interface:
...
- Click Setting→Action URL
- Filled the needed value in the necessary blank.
- Click to save the setting.
Click UC802/T User ManualAction URL for more how to use, or check on www.htek.com
...
For more information, please check BLF list Note.
Voice Message
To configure the Voice mail feature
...
To upgrade via HTTP, the "Management"→"auto provision"→" Firmware Upgrade"→"Upgrade Mode" field needs to be set to HTTP, respectively. "Firmware Server Path" needs to be set to a valid URL of a HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid URL.
e.g. firmware firmware.mycompany.com:5688/Hanlong
e.g. www www.mycompany.com:5688/fm/Hanlong
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root/fm directory of the HTTP server.
(3) Visiting "HTTP:\\192.168.0.254\fm\fw8xx.rom on localhost by browser" to verify the HTTP Server. If visiting "HTTP: \\192.168.0.254\fm\fw8xx.rom on other computer is no prompt to download fw8xx.rom file, please check the firewall (Suggest close the firewall).
To configure the server path via web interface:
...
- Click Setting→Tones
- Define the dial tone, ringing, busy tone…
- For the tones, you can check with your system administrator.
- More Click Tone Notes.
How to download XML Configuration?
...
- For Vlan information, please click VLAN Note
How to use LLDP?
- For LLDP information, please click VLAN Note
- VLAN Notes including:
1. Voice VLAN
2. Major Benefits of Using VLANs
3. VLAN discovery method on Htek ip phones
4. LLDP Feature on Htek IP Phones
5. Supported TLVS of IP Phones
6. Configuring LLDP Feature
7. DHCP VLAN
8. Open the DHCP VLAN on the Htek IP Phones
9. VLAN under Bridge Mode
10. VLAN underNAT Mode
How to Set LCD and Web GUI:
How to Upgrade via FTP?
- Click How to Upgrade Note
How to make Ringtone?
- Click How to Make Ringtone
How to use Open VPN?
- Click Open VPN note
Provisioning Guide on Free PBX:
How to Upload Wallpaper?
- Click Wallpaper Upload Notes
How to Use Auto Provision Phonebook?
- Click About AP Phonebook
All Documents
- Click Documents Guide, you can get all tech files.