Model Configuration

You can manage device configurations by customizing configuration templates and classifying them by the model of devices. You can update the configuration by setting the parameters in the template or in the text.

On the Page of Model Configuration

1	The filter area of searching a model configuration.
2	There are three options to deal the model template in the list.
	Add or delete a model configuration template.
	Rescore the model configuration.
3	The list of the model configuration template you have added.
	You can update the model configuration template.
	You can delete the model configuration template.
	You can push the model configuration template to devices.
	Export: Download the configuration file based on the template. View Params: View the updated parameters in the template. Config Text: You can update parameters via text. Update: You can update the name and the device model of a model template. Restore Default: Restore all the parameters of the template to their default values.

Add a Model Configuration Template

You can add a model configuration template based on the model in Device Management -> Device Model. After a template has been added, you can update the parameters in it and push it to devices.

Procedure

1. Click Configuration Management -> Model Configuration.

2. Click +Add button on the top left corner.

3. Enter the file name and choose the device model. You can also add remarks.

4. Click Confirm button.

Update Parameters of a Model Configuration Template and Push

After you add a template of a model, you can update the parameters of a template in TWO ways:

• by a template

• by text

Set Parameters by a Template

1．Click Configuration Management ->Model Configuration.

2．Click  on the right side of a template.

3．Check the box and enter the configuration parameters in the template.

e.g. You want to change the LCD Language to English. In the template, click Settings -> Preferences -> check the box of LCD Language -> choose English in the drop down menu -> Confirm.

4. Click Confirm button. The popup will show the tips: Update the device configuration now?

5. If you click Confirm, you can choose devices to provision. Then click Push To Update. If you click Cancel, the changes will be saved in the template.

Set Parameters by Text

1. Click Configuration Management -> Model Configuration.

2. Click   on the right side of the site configuration and choose Config Text.

3. Enter the configuration parameters to be updated.

You can update any parameters supported by the device in the text setting parameters. The input text parameters must meet the standard format.

e.g. If you want to change the language of LCD of the device to English, in the Config text, you should type

<P8621 para="Preference_LcdLanguage">0</P8621>

then click Confirm. Just Like the figure below.

Then, you can click  -> View Params to check the changes. Like the figure below, the parameters of the template have changed.

4. Click Confirm button. Please Choose Device page will pop-up. Check the boxes before devices, which you want to provision.

5. If you click Confirm, you can choose devices to provision. Then click Push To Update. If you click Cancel, the changes will be saved in the template.

Push a Model Configuration Template to Devices

You can push a model template to devices depending on their model.

1. Click Configuration Management -> Model Configuration.

2. Click   on the right side of the site template.

3. Select devices to be pushed.

4. Choose Task Execution Mode -> Confirm.

Edit a Model Configuration Template

You can update the name and the mode of a template you have added in the list.

1. Click Configuration Management -> Site Configuration.

2. Click   on the right side of the configuration and choose Update.

3. Edit the name, the model or remarks of the configuration.

4. Click Confirm button.

View the Updated Parameters of a Model Configuration Template

You can view the parameters you have updated in a template.

 Procedure

1．Click Configuration Management -> Model Configuration.

2．Click   on the right side of a template and choose View Params. You can view the name, type and value of parameters you have updated.

Download a Model Configuration Template

You can download the configuration to view the updated configuration of the model.

1. Click Configuration Management -> Site Configuration.

2. Click  on the right side of the model configuration and choose Download.

Delete Model Configuration Templates

1．   Click Configuration Management -> Site Configuration.

2．   Delete one configuration or more.

a)        Click on the right of the site model you want to delete.

b)        Click Confirm button.

Or

a)      Check the boxes of the templates you want to delete.

b)      Click Delete button.

c)       Click Confirm button.