Zero Touch

Zero Touch allows you to configure the network parameters and provisioning server address via phone user interface during startup. This feature is helpful when there is a system failure on the IP phone. To use Zero Touch, make sure this feature is enabled.

You can use this feature to configure network parameters and auto provision quickly.

Procedure

1. Enter the zero touch screen (have two way, do one of the following)

2. Auto enter the zero touch screen when phone startup, you need enable zero touch active via web interface

3. Enter the desired waiting time in the Wait Time(1~100s) field.

The default value is 5.

Open

Manual trigger by the Zero Touch key to enter the zero touch screen, You can set it via web interface or phone interface

To configure the Zero Touch via Phone interface

1. Press Menu→ Features→ Function Keys→ Line Keys as Function Keys→ Line Key2(for example)

2. Press

   Open

   

   and

   key to select the Zero Touch in the Type field.

3. Press

   or Save soft key to save the configuration.

To configure the Zero Touch via Web interface

1. Click Function Keys→ Line Key.

2. Select the desired Line Key and select Zero Touch in the Type field.

3. Click the

   button to save the configuration.

And you will see this

Press the OK soft key and you can change network parameters in this page

Tip: temporary changes you made in this page will be saved in the last step

Press the Next soft key and you can change provision parameters in this page

Tip: temporary changes you made in this page will be saved in the last step

Press the Next soft key, save the above temporary configuration, then IP phone will connect to the configured provisioning server and perform auto provisioning.