/
uaCSTA TAPI for Htek phones

uaCSTA TAPI for Htek phones

uaCSTA TAPI for Htek phones

SETUP ON THE PHONE:

Open the browser interface of the phone by entering the IP- address with http: // (Example: https: // 192.168.178.92), log in and use an account that has not been used so far, in our example account 1

 

Account to register

 

Under Profile->Basic

Primary SIP Server: DNS-Name or IP- address of the PC and port

Example : 192.168.178.116:55556

SIP Transport: Protocol of the telephone interface in uaCSTA Server for SIP Phones. Example : TCP

Register Expiration:15

Under Account1->Basic

Account active: Yes

Label: uaCSTA

SIP User ID: MAC- Address of the phone Example : 001FC11D2CDE (ablesbar in the menu under Status)

Authenticate ID: MAC- Address of the phone Example : 001FC11D2CDE (ablesbar in the menu under Status)

Authenticate Password: The password ( stored in uaCSTA ( under Windows) under “CTI- Settings for Desk Phones” under “Password of the CTI- Interface” is explained further below. . Simply assign a password and remember ).

Note: Htek phone CSTA is enabled by default.

SETTINGS ON THE PC:

Under Windows you click on the three dots : in the uaCSTA-Menu

CTI- settings for desk phones : Mac- address and IP- address of the phone can be found in the phone menu under Status

Be sure to switch the top item from Cisco to Htek, enter the IP- address of the phone, use port 55556 ( as also stored in the phone under Account ), enter the MAC- address of the Htek phone, set a password, which you also use in the phone with uaCSTA-Konto1 Then the account should register. If not, restart the PC and the phone and make sure on the PC beforehand that the telephony service is set to “automatic”

 

TEST:                                                                                                                                                                                                                                                                                                                                                                                                          

For a first test click on :

Enter a phone number and click on the green handset . Your phone should now dial :

TEST TAPI:

Start Phone.exe from https://tapicall.de/phone.exe. Select “Global IP Tel MultiLine 000” under Device and then click on Start Session. Enter a phone number and click on

 

If you can do that, you're done! Then you can z.B. https://tapicall.de/download/ install and enjoy CTI!

 

Related content

(Before version: 2.0.4.4.50) IP Phones Firmware Release Notes
(Before version: 2.0.4.4.50) IP Phones Firmware Release Notes
Read with this
Registration
Registration
More like this
Htek 2.42.6.3.36R15
Htek 2.42.6.3.36R15
Read with this
Directly IP Call
Directly IP Call
More like this
Manage Accounts
Manage Accounts
More like this
Action URL & URI
Action URL & URI
More like this