System Management
- Steve
This section focuses on how to maintain HDMS, adding users, adding roles, adding sites, log and etc.
System Configuration
By default, most of the basic configuration of the system does not need to be modified. You can modify the configuration carefully as needed. Once you upload a new file via 
No. | Description |
 1 | Family: Defining the model information of devices in the system. If you have added a model in Device Model, please check or add the description of the model in this file. |
 2 | Cfg: As a component of a configuration template, the XML file that can be recognized by the device is generated from this file. |
 3 | Profile: This file is used when you create a profile.  |
 4 | Account: This file is used when you created an accounts. |
 5 | Lang: The language pack file is used to generate the language for user interface display. |
 6 | Config Common: This file is only used for group management. The configuration of group push function is generated from this file. |
No. | Description |
1 | Used to limit the length of messages pushed to the device. |
2 | Used to establish TCP heartbeat and character transmission. |
 3 | The redirection address of the device set on the RPS when adding the device. |
4 | Used to configure the information of SIP server. |
SIP Enabled | If open the SIP server in the HDMS. |
SIP LAN Multicast IP | For the devices of HDMS, 224.0.1.75 is the default value. |
SIP LAN Server IP | The IP address of HDMS |
SIP LAN Server Port | 5060 is the default value. |
SIP Cfg Url | The IP address the configuration server, the SIP server uses. |
5 | The URL and login information of RPS server. |
RPS Server Url | https://rps.htek.com/index.php/xmlrpc is the default value. |
RPS UserName | The username of the RPS you are using. |
RPS UserPassword | The password of the RPS you are using. |
Â