Upgrading Firmware on Yeastar

Owned by Former user (Deleted)
Last updated: 10月 15, 2018
1 min read

Over View

The phone will upgrade the firmware automatically when it restarts, otherwise the phone will auto-upgrade when the inspection time expires. The part "Operating Instructions" will show you how to upgrade the firmware in the Yeastar.

Preconditions

Auto Provisioning→Firmware Upgrade.
Only the models of the configured phones in the "Device List" can be listed on the "Firmware Upgrade" page. In this page, enable Upgrade. Only the configured phones in the "Device List" can upgrade the firmware.

Operating Instructions

1. Auto Provisioning→Firmware Upgrade.
Click "Upload".
2. Click "Browse", choose a rom file matched with the model (fw8xx.rom and fw9xx.rom), and then click "Upload".
3. After uploading, the file's name will be filled in the blank.
4. Check the "Enable Upgrade" option.
5. Auto Provisioning→Device List.
Edit the phone. Click "Save", then "Reboot phone now?" will be shown. Click "Yes" to upgrade firmware.
Or click the IP Address of the phone and you will enter the webserver of the phone. Reboot the phone through the webserver, and it will upgrade.